f you can't find what you are looking for Call Us! or go to the
Banner  Home Page
Seltrol is a stocking distributor of a wide variety of industrial automation equipment. We are located on South Carolina and service SC and NC. Our inside and outside sales staff are available to assist you with your application. We provide technical - application support for all of our products.

 
d10 Series
1 Static and dynamic programming push buttons

 
2 4-digit TEACH and signal-strength readout

 
3 Output indicators

 
4 2 m or 9 m attached cable or Pico-style quick disconnect

 
  • Advanced fiber optic amplifier for use with plastic fibers
  • High-performance, low-contrast sensing with automatic TEACH options
  • Easy-to-set static, dynamic, and single-point programming plus manual adjust capability for fine tuning
  • Four-digit TEACH display and signal strength readout, plus operating status indicators
  • Visible red or visible green sensing beam
  • Models available with either dual discrete outputs (NPN or PNP) or one discrete and one analog (voltage or current) sourcing
  • Gate input, selectable off-delay

Download Literature (Analog/Discrete Output Version)

Download Literature (Dual Discrete Output Version)

 
D11 Series
1 Dual-LED multi-function indicator system

 
2 Sensitivity adjustment

 
3 2 m or 9 m attached cable or Pico-style quick disconnect

 
4 35 mm DIN-rail mountable

 
  • Economical, high-performance plastic fiber optic sensors
  • Marginal gain indicator with alarm output
  • Choice of red, green, blue, or white light source LED for color-differentiation applications
  • Standard D11 models have manual sensitivity adjustment
  • D11E Expert models, ideal for low-contrast applications, feature easy push-button TEACH mode sensitivity setup with remote programming capability
  • Mounting bracket and hardware supplied for surface mounting

Download Literature (D11 Expert Series, Visible Red LED)

Download Literature (D11 Expert Series, Blue, Green or White LED)

Download Literature (D11 Series, Visible Red LED)

Download Literature (D11 Series, Visible Green, Blue or White LED)

 


 
D12 Series
1 7-LED bargraph signal strength indicator system
2 Dual-LED multi-function status indicator system
3 Sensitivity adjustment
4 2 m or 9 m attached cable or Pico-style quick disconnect
5 35 mm DIN-rail mountable
  • LED bargraph indicates signal strength, sensing contrast, programming status, diagnostic warnings (most models; bargraph inoperative in high speed mode)
  • Marginal gain indicator with alarm output
  • Glass and plastic fiber optic models available
  • Mounting hardware and bracket supplied for surface mounting
  • Standard D12 models solve routine applications
  • D12_Y models feature high-speed sensing response
  • D12_H models feature higher sensing power
  • D12DAB6 ac-coupled sensors excel in low-contrast applications
  • D12E Expert series features easy push button TEACH-mode setup

Download Literature(D12 Expert Series)

Download Literature(D12 Series  AC-Coupled)

Download Literature(D12 Series High Power)

Download Literature(D12 Series Standard & High Speed)

FI22 Series
1 Push-button TEACH-mode programming

 
2 Available with integral cable or 6-pin Pico-style quick disconnect

 
3 Easy-to-read 8-segment bargraph status indicator

 
4 Quickly snap-mounts to custom bracket

 
5 Fiber Ports

 
  • Low-profile fiber optic sensors are designed for inconspicuous surface mounting
  • 8-segment LED light bar indicates relative received signal strength, sensing contrast, programming status, and diagnostic warnings
  • TEACH-mode programming for static, dynamic, and single-point programming plus manual adjustment for fine-tuning
  • Easy-to-read TEACH and signal strength readout, plus indicators for a continuous readout of operating status
  • Output may be programmed for either light or dark operate

Download Literature


 
MAXI-BEAM® Sensors
1 Sealed sensitivity adjustment

 
2 Interchangeable sensor head (rotatable in 90° increments)

 
3 Interchangeable power block

 
4 Dual output indicators

 
5 Programming rings and logic module

 
6 Status indicator LED

 

 

  • Modular design permits easy exchange of all sensing components without disturbing wiring connections
  • Optional output timing logic modules with programming ring
  • Quad-ring gasketed components for reliable industrial service
  • Available in opposed, retroreflective (polarized and non-polarized), diffuse, convergent, fixed-field, and glass and plastic fiber optic modes

Download Literature


 
minibeam Series
1 Signal strength or output indicator

 
2 Gain adjustment or TEACH setup button

 
3 2 m or 9 m attached cable, quick-disconnect fitting or Euro-style pigtail

 
4 Models available with or without 18 mm threaded "nose"

 

 

  • Compact, high-performance sensors with 18mm threaded "nose" (most models)
  • Models for ac, dc, or ac / dc ("universal") operation
  • Opposed mode, opposed clear plastic detection, diffuse and divergent, polarized and non-polarized retroreflective, convergent, glass and plastic fiber optic modes
  • Convergent and fiber optic models offer infrared or visible red, blue, white, or green light source LED: select a color based on your color-differentiation application needs
  • SME312 Expert models offer easy, push button TEACH mode setup
  • MIAD9 series NAMUR models for use in hazardous environments with approved switching amplifiers having intrinsically safe input circuits
  • MINI-BEAM models for clear plastic detection; MINI-BEAM Expert models for clear object detection

Download Literature(MINI-BEAM SM312 Series, ac models Glass Fiber Optic, Infrared)

Download Literature(MINI-BEAM SM312 Series, ac models Plastic Fiber Optic, Visible Red LED)

Download Literature(MINI-BEAM SM312 Series, dc models Glass Fiber Optic, Infrared)

Download Literature(MINI-BEAM SM312 Series, dc models Glass Fiber Optic, Visible Red LED)

Download Literature(MINI-BEAM SM312 Series, dc models Plastic Fiber Optic, Visible Red LED)


 
multibeam Series
1 Sealed sensitivity adjustment

 
2 Interchangeable AC or DC power block

 
3 Interchangeable output logic module

 
4 Sensor block

 
5 Status indicator LED

 

 

  • The sensing industry's most flexible modular sensor family, permitting over 5,000 custom configurations for ac or dc power
  • AC models are physically and electrically interchangeable with heavy-duty industrial limit switches to provide non-contact control
  • Models for opposed, polarized and non-polarized retroreflective, convergent, and glass fiber optic modes
  • Special models available for ambient light sensing, optical data transmission, and optical edgeguiding

Download Literature


 
Standard OMNI-BEAM Sensors
1 Display And Trouble Alert multiple-LED self-diagnostic system

 
2 Interchangeable AC or DC power block (DC shown)

 
3 Attached cable, or Mini- or Euro-style quick disconnect

 
4 Interchangeable sensor head

 
5 Optional output logic module (inside)

 

 

  • Choose a sensor head and a power block; 45LM58 logic module is optional
  • Exclusive D.A.T.A multiple-LED system displays received signal strength, sensing contrast, and warns of seven different problem conditions
  • Easily field-programmable for sensing hysteresis, signal strength display scale factor, light / dark operate, N.O. / N.C. output
  • Opposed, retroreflective, diffuse, convergent, and fiber optic modes
  • Convergent and fiber optic models with choice of red, blue, or green LED for color-differentiation applications
  • Optional 45LM58 timing module offers ON-DELAY, OFF-DELAY, ON / OFF DELAY, ONE-SHOT, and DELAYED ONE-SHOT output switching logic
  • Analog models offer analog voltage outputs that are directly proportional to the sensing signal

Download Literature(OMNI-BEAM OPBA3 Series, analog output)

Download Literature(OMNI-BEAM Series, AC-Coupled (OSBFAC)

Download Literature(OMNI-BEAM Series, Electromechanical Relay Outputs)
Download Literature(OMNI-BEAM Series, Solid-State Outputs)


 
pc44 Series
1 Sensitivity adjustment

 
2 Gold-plated pins for connection to PC board

 
3 Dual-LED multi-function indicator system

 

 

  • Plug-in plastic fiber optic sensors for PC-board use
  • Use with Banner 1mm (0.04") plastic fiber optic assemblies
    (a large selection of sensing tip styles is available)
  • Marginal gain indicator with alarm output
  • Easy fiber installation: insert fibers and close gripper door

Download Literature



 
  • Miniature rectangular sensors in two housing styles
  • Powerful visible red sensing beam for easy setup and alignment
  • Opposed, polarized retroreflective, convergent, diffuse, and plastic fiber optic modes
  • Marginal gain indicator with alarm output

Download Literature


 
q45 Series
1 Optional 7-element LED signal strength display and/or output switching logic

 
2 2 m or 9 m attached cable or Mini-style quick disconnect

 
3 Gasketed transparent cover

 
4 Triple LED multi-function indicator system

 

 

  • Advanced one-piece sensors with outstanding optical performance
  • Extremely rugged design exceeds NEMA 6P and IEC IP67 standards; sensors withstand 1200 psi washdown
  • Highly-visible Power, Signal (AID™ system), and Output indicator LEDs
  • Standard models accommodate output timing logic or 7-segment LED signal strength display
  • Available in opposed, polarized and non-polarized retroreflective, diffuse, convergent, and glass and plastic fiber optic modes
  • Models for dc, ac, or ac / dc ("universal") power
  • Also available in laser diode retroreflective and NAMUR models

Download Literature(Q45 Series NAMUR)

Download Literature(Q45 Series, ac models Electromechanical Relay Output)

Download Literature(Q45 Series, ac models Solid-State Outputs)

Download Literature(Q45 Series, ac/dc models Electromechanical Relay Output)

Download Literature(Q45 Series, ac/dc models Solid-State Outputs)

Download Literature(Q45 Series, dc models Solid-State Outputs)



 
  • Compact, low-cost dc sensors in NEMA 6P (IEC IP67) die-cast housings
  • Outstanding immunity to electrical noise
  • Marginal gain indicator with alarm output
  • QM42 series: opposed, polarized retroreflective, diffuse, short-range adjustable field, and plastic fiber optic modes
  • QMT42 series (slightly larger): fixed field and long-range adjustable field modes

Download Literature



 
  • Outstanding color contrast sensitivity: detects 16 gray scale changes and the toughest color mark contrasts, including 20% yellow on white
  • Choose from infrared (glass fiber optics only) or one of four beam colors: visible red, blue, green, and white
  • Easy push-button programming includes Static TEACH, Dynamic TEACH, and Remote TEACH, plus manual sensitivity adjustment
  • Models for both glass and plastic fiber optics
  • Mounts flat or to a 35 mm DIN rail. Two brackets included (one for angle-mount; one for flat mount)

Download Literature


 
sm512 Series
1 Sensitivity control under gasketed nylon screw

 
2 2 m or 9 m attached cable

 
3 Signal indicator LED

 

 

  • Rugged sensors in narrow 12.7mm (0.5") wide housings
  • Easily stackable for mountable in tight spaces
  • Opposed, non-polarized retroreflective, diffuse, convergent, and glass fiber optic modes
  • DC operation only

Download Literature(SM512 Series, Glass Fiber Optic Models)


 
valubeam Series
1 2 m or 9 m attached cable or Mini-style quick disconnect

 
2 Sensitivity adjustment (rear panel)

 
3 LED signal strength indicator

 

 

  • Economy, performance, and reliability in a rugged line of sensors with standard limit-switch mounting hole spacing
  • Opposed, retroreflective, diffuse, convergent, and glass and plastic fiber optic modes
  • Wide choice of standard models for ac, dc, or ac / dc operation
  • SM91EN/RN models have enhanced immunity to sunlight
  • SMA990 series models have built-in six-digit totalizing counter (no external outputs)
  • SMI912 series intrinsically-safe sensors are for use in hazardous locations

Download Literature

WORLD BEAM QS18 Series
QS18 Series
1 Models available with or without 18 mm threaded "nose"

 
2 Available with a variety of cable and connector options

 
3 Rugged sealed housing, protected circuitry

 
4 Bright LED operating status indicators are visible from 360°

 

 

  • Innovative housing design fits almost any mounting situation
  • Opposed, polarized and non-polarized retroreflective, convergent, regular and wide-angle diffuse, laser, plastic or glass fiber optic and adjustable-field sensing modes
  • WORLD-BEAM Expert QS18E models offer easy push-button TEACH-mode setup
  • 360-degree visible multi-function LED indicator system

Download Literature

PLASTIC FIBERS

Bifurcated
  Model Description
  PBAT43TMB5 90° with thread, stainless steel braid
  PBAT46TMB5 90° with thread, stainless steel braid
  PBCF21.7T coaxial ferrule, polyethylene
  PBCF21X46U coaxial ferrule, polyethylene
  PBCF46U coaxial ferrule, polyethylene
  PBCT21X46U coaxial thread, polyethylene
  PBCT23T coaxial thread, polyethylene
  PBCT23T1 coaxial thread, polyethylene
  PBCT23TM3 coaxial thread, polyethylene
  PBCT23TMB5 coaxial thread, stainless steel braid
  PBCT23TS coaxial thread, stainless steel monocoil
  PBCT23TS1 coaxial thread, stainless steel monocoil
  PBCT26TMB5 coaxial thread, stainless steel braid
  PBCT26U coaxial thread, polyethylene
  PBCT26UM3 coaxial thread, polyethylene
  PBCT26UM4M2.5 coaxial thread, polyethylene
  PBCT46U coaxial thread, polyethylene
  PBEFP26U extended ferrule probe, polyethylene
  PBF16U ferrule, polyethylene
  PBF26U ferrule, polyethylene
  PBF43TMB5 ferrule, stainless steel braid
  PBF46TMB5 ferrule, stainless steel braid
  PBF46U(HF) ferrule, polyethylene
  PBF46UM3MJ1.3 ferrule, polyethylene
  PBF66U ferrule, polyethylene
  PBFM16U miniature ferrule, polyethylene
  PBFM1X43T miniature ferrule, polyethylene
  PBFM1X86T miniature ferrule, polyethylene
  PBFM46U(HF) miniature ferrule, polyethylene
  PBFMP12T miniature ferrule probe, polyethylene
  PBFMP12TMP.2 miniature ferrule probe, polyethylene
  PBFMP16UMP.2 miniature ferrule probe, polyethylene
  PBP16U probe, polyethylene
  PBP26U probe, polyethylene
  PBP43TS probe, stainless steel monocoil

 

PBP46U(HF) probe, polyethylene
  PBP46UC probe, polyethylene
  PBPF26U ferrule probe, polyethylene
  PBPF26UMB ferrule probe, polyethylene
  PBPMSB36U miniature side view probe, polyethylene
  PBPS26U side view probe, polyethylene
  PBPS43TMB5 side view probe, stainless steel braid
  PBPS46TMB5 side view probe, stainless steel braid
  PBPS46U(HF) side view probe, polyethylene
  PBPS66U side view probe, polyethylene
  PBR1X326U end view rectangular, polyethylene
  PBRS1X326U side view rectangular, polyethylene
  PBRS26U flat rectangular, polyethylene
  PBT16U thread, polyethylene
  PBT26U(HF) thread, polyethylene
  PBT26UHT1 thread, cross-linked polyethylene
  PBT43TMB5 thread, stainless steel braid
  PBT43TS thread, stainless steel monocoil
  PBT46TMB5 thread, stainless steel braid
  PBT46U(HF) thread, polyethylene
  PBT46UC thread, polyethylene
  PBT46UHT1 thread, cross-linked polyethylene
  PBT66U thread, polyethylene
  PBTA43TMB5 thread with 90°, stainless steel braid
  PBTA46TMB5 thread with 90°, stainless steel braid
  PBTP43TMB5 thread & probe, stainless steel braid
  PBTP46TMB5 thread & probe, stainless steel braid

 

Special Application
  Model Description
  BMT16.6S-HT thread, stainless steel monocoil
  IMT.756.6S-HT thread, stainless steel monocoil
  L2 range-extending attachment lens, no jacket
  L2RA 90° Right-Angle Range-Extending Attachment Lens, no jacket
  L4C20 convergent attachment lens, no jacket
  L4C6 convergent attachment lens, no jacket
  LZ3C8 adjustable convergent attachment lens side exit, no jacket
  P12-C1 convergent side exit, polyethylene
  P22-C1 convergent straight exit, polyethylene
  P32-C2 convergent rectangular, polyethylene
  PBE46UTMLLP fluoropolymer-encapsulated level probe, polyethylene
  PBE46UTMLLPHT1 fluoropolymer-encapsulated level probe, cross-linked polyethylene
  PBE46UTMNL fluoropolymer-encapsulated, flouropolymer tubing
  PDIS46UM12(HF) slot, polyethylene
  PIE46UT fluoropolymer-encapsulated with lens, flouropolymer tubing
  PIE66UTMNL fluoropolymer-encapsulated, flouropolymer tubing
  PIES46UT fluoropolymer-encapsulated with side view lens, flouropolymer tubing
  PLI-A10 coaxial thread adjustable (integrated convergent lens), polyethylene
  TGR3/8MPFMQ liquid level probe, polypropylene housing

 

Individual
  Model Description
  PIA16U 90°, polyethylene
  PIA26U 90°, polyethylene
  PIAT16U 90° with thread, polyethylene
  PIAT26U 90° with thread, polyethylene
  PIAT43TMB5 90° with thread, stainless steel braid
  PIAT46TMB5 90° with thread, stainless steel braid
  PIAT46U(HF) 90° with thread, polyethylene
  PIAT66U 90° with thread, polyethylene
  PIF16U ferrule, polyethylene
  PIF26U ferrule, polyethylene
  PIF26UMLS ferrule, polyethylene
  PIF43TMB5 ferrule, stainless steel braid
  PIF46TMB5 ferrule, stainless steel braid
  PIF46U(HF) ferrule, polyethylene
  PIF66U ferrule, polyethylene
  PIFM1X46U miniature ferrule, polyethylene
  PIFM46U(HF) miniature ferrule, polyethylene
  PIFP26U ferrule probe, polyethylene

 

PIL46U(HF) lens, polyethylene
  PIP16U probe, polyethylene
  PIP26U probe, polyethylene

 

PIP46U(HF) probe, polyethylene
  PIP46UC probe, polyethylene
  PIPS16U side view probe, polyethylene
  PIPS26U side view probe, polyethylene
  PIPS43TMB5 side view probe, stainless steel braid
  PIPS46TMB5 side view probe, stainless steel braid
  PIPS46U(HF) side view probe, polyethylene
  PIPS46UHT1 side view probe, cross-linked polyethylene
  PIPS66U side view probe, polyethylene
  PIPSB46U(HF) side view probe, polyethylene
  PIPSM26U side view probe, polyethylene
  PIR1X166U end view rectangular, polyethylene
  PIRS1X166U side view rectangular, polyethylene

 

PIRS1X166UMPMAL side view rectangular, polyethylene
  PIT16U thread, polyethylene
  PIT1X46U thread, polyethylene
  PIT23TS thread, stainless steel monocoil
  PIT26U(HF) thread, polyethylene
  PIT26UHT1 thread, cross-linked polyethylene
  PIT43TMB5 thread, stainless steel braid
  PIT43TS thread, stainless steel monocoil
  PIT43TS1 thread, stainless steel monocoil
  PIT43TT thread, flouropolymer tubing
  PIT46TMB5 thread, stainless steel braid
  PIT46U(HF) thread, polyethylene
  PIT46UC thread, polyethylene
  PIT46UHT1 thread, cross-linked polyethylene
  PIT66U thread, polyethylene
  PITA43TMB5 thread with 90°, stainless steel braid
  PITA46TMB5 thread with 90°, stainless steel braid
  PITF26U thread & probe, polyethylene
  PITP16U thread & probe, polyethylene
  PITP43TMB5 thread & probe, stainless steel braid
  PITP46TMB5 thread & probe, stainless steel braid

GLASS FIBERS

 
Bifurcated Individual
Model Description
BA1.53PMETA extra tight 90°
BA1.53PMTA tight 90°
BA1.53SMETA extra tight 90°
BA1.53SMTA tight 90°
BA2.53S 90°
BA23S 90°
BAM.752S miniature 90°
BAMM.442S micro miniature 90°
BAR.753S rectangular bundle 90°
BAR.753SMRA rectangular bundle 90°
BAR.753SMTA tight rectangular bundle 90°
BAR.753SMTAMRA tight rectangular bundle 90°
BAT2.53S 90° with thread
BAT23S 90° with thread
BATR.753S rectangular bundle 90° with thread
BATR.753SMRA rectangular bundle 90° with thread
BF2.53S ferrule
BF23S ferrule
BHA2.53S 45°
BHA23S 45°
BHAR.753S rectangular bundle 45°
BHAR.753SMRA rectangular bundle 45°
BHAT2.53S 45° with thread
BHAT23S 45° with thread
BHATR.753S rectangular bundle 45° with thread
BHATR.753SMRA rectangular bundle 45° with thread
BM.752P miniature
BM.752S miniature
BMAP.753P miniature 90° probe
BMHAP.753P miniature 45° probe
BMM.442P micro miniature probe
BMM.442S micro miniature probe
BMP.753P miniature probe
BMT.753P miniature thread
BMTAP.753P miniature thread & 90° probe
BMTHAP.753P miniature thread & 45° probe
BMTP.753P miniature thread & probe
BP13S probe
BR13P rectangular
BR13S rectangular
BR2.53P rectangular
BR2.53S rectangular
BR23P rectangular
BR23S rectangular
BT13P thread
BT13S thread
BT2.53S thread
BT23S thread
BT23SM900 high-temp thread
BT23SMSS SS thread
BTA23S thread & 90°
BTAR.753S thread & rectangular bundle 90°
BTAR.753SMRA thread & rectangular bundle 90°
BTETA1.53S thread & extra tight 90°
BTHA2.53S thread & 45°
BTHA23S thread & 45°
BTHAR.753S thread & rectangular bundle 45°
BTHAR.753SMRA thread & rectangular bundle 45°
BTR.753S thread & rectangular bundle
Model Description
IA1.53PMETA extra tight 90°
IA1.53PMTA tight 90°
IA1.53SMETA extra tight 90°
IA1.53SMTA tight 90°
IA2.53S 90°
IA23S 90°
IAM.752S miniature 90°
IAMM.442S micro miniature 90°
IAR.753S rectangular bundle 90°
IAR.753SMRA rectangular bundle 90°
IAR.753SMTA tight rectangular bundle 90°
IAR.753SMTAMRA tight rectangular bundle 90°
IAT2.53S 90° with thread
IAT23S 90° with thread
IATR.753S rectangular bundle 90° with thread
IATR.753SMRA rectangular bundle 90° with thread
IF2.53S ferrule
IF23S ferrule
IHA2.53S 45°
IHA23S 45°
IHAR.753S rectangular bundle 45°
IHAR.753SMRA rectangular bundle 45°
IHAT2.53S 45° with thread
IHAT23S 45° with thread
IHATR.753S rectangular bundle 45° with thread
IHATR.753SMRA rectangular bundle 45° with thread
IM.752P miniature
IM.752S miniature
IMAP.753P miniature 90° probe
IMHAP.753P miniature 45° probe
IMM.442P micro miniature probe
IMM.442S micro miniature probe
IMP.753P miniature probe
IMT.753P miniature thread
IMTAP.753P miniature thread & 90° probe
IMTHAP.753P miniature thread & 45° probe
IMTP.753P miniature thread & probe
IP13S probe
IR13P rectangular
IR13S rectangular
IR2.53P rectangular
IR2.53S rectangular
IR23P rectangular
IR23S rectangular
IT13P thread
IT13S thread
IT2.53S thread
IT23S thread
IT23SM900 high-temp thread
IT23SMSS SS thread
ITA2.53S thread & 90°
ITA23S thread & 90°
ITAR.753S thread & rectangular bundle 90°
ITAR.753SMRA thread & rectangular bundle 90°
ITETA1.53S thread & extra tight 90°
ITHA2.53S thread & 45°
ITHA23S thread & 45°
ITHAR.753S thread & rectangular bundle 45°
ITHAR.753SMRA thread & rectangular bundle 45°
ITR.753S thread & rectangular bundle