If you can't find what you are looking for Call Us! or go to the
Banner  Home Page
Seltrol is a stocking distributor of a wide variety of industrial automation equipment. We are located on South Carolina and service SC and NC. Our inside and outside sales staff are available to assist you with your application. We provide technical - application support for all of our products.
R55 Sensors

 
r55 Series
1 Easy push-button programming

 
2 10 element display output indicator (all models)

 
3 2 m or 9 meter attached cable or Euro-style quick disconnect (all models)

 
4 Sensititivity control (standard R55 models only)

 

 
  • R55 models detect the most difficult color mark contrasts, including 20% yellow on white
  • Totally solid-state; no bulbs to replace
  • Standard R55 and R55E Expert models feature two lens positions and a choice of sensing image orientations
  • Standard R55 offers choice of green or white LED; manual setup
  • R55E Expert offers green, blue, or white LED; easy push button TEACH mode setup with remote programming capability
  • R55F glass and plastic fiber optic models offer green, blue, white, red or infrared (glass only) LED; easy push-button TEACH-mode setup with remote programming capability
   

Download Literature(R55 Expert Series)

Download Literature(R55 Fiber Optic Series)

Download Literature(R55 Series, Convergent-Mode Models (Green LED)

Download Literature(R55 Series, Convergent-Mode Models (White LED)
D11 Series
1 Dual-LED multi-function indicator system

 
2 Sensitivity adjustment

 
3 2 m or 9 m attached cable or Pico-style quick disconnect

 
4 35 mm DIN-rail mountable

 
  • Economical, high-performance plastic fiber optic sensors
  • Marginal gain indicator with alarm output
  • Choice of red, green, blue, or white light source LED for color-differentiation applications
  • Standard D11 models have manual sensitivity adjustment
  • D11E Expert models, ideal for low-contrast applications, feature easy push-button TEACH mode sensitivity setup with remote programming capability
  • Mounting bracket and hardware supplied for surface mounting

Download Literature (D11 Expert Series, Visible Red LED)

Download Literature (D11 Expert Series, Blue, Green or White LED)

Download Literature (D11 Series, Visible Red LED)

Download Literature (D11 Series, Visible Green, Blue or White LED)

 

 
sl Series
1 2 m or 9 m attached cable, or 5-pin Euro-style quick disconnect

 
2 Reciever

 
3 Emitter

 
4 Sensitivity Selector

 

 
  • Easy-to-use self-contained opposed mode sensor pairs in rugged u-shaped housings
  • 10 mm - wide sensing slot (SL10 models) or 30 mm - wide sensing slot (SL30 models)
  • Applications include registration mark detection, hole detection, gear tooth detection, edge guiding, and counting
  • Molded-in beam guides simplify installation and alignment
  • Visible red sensing beam (except SL0, which is infrared)
  • SL10 and SL30 models feature manual sensitivity adjustment
  • SLE10 and SLE30 Expert models feature easy push button TEACH mode setup with provision for remote programming
  • SL0 (with fixed sensitivity) is an economical choice for many OEM applications

Download Literature(SL10 Series Slot Sensors)

Download Literature(SL30 Series Slot Sensors)

Download Literature(SLE10 Expert Series Slot Sensors)

Download Literature(SLE30 Expert Series Slot Sensors)

Download Literature(SLO30 Series Slot Sensor)

 
qc50 Series
1 Push-button SET for easy programming

 
2 Bright LEDs indicate output of programmed colors

 
3 3-position swivel connector

 

 
  • Accurately analyzes and compares color to color, or varying intensities of one color
  • Easy-to-set push-button programming options for 1, 2, or 3 colors
  • Compact, self-contained design
  • Fast 335-microsecond sensing response time
  • Three programming parameters: channel, sensing mode, and tolerance level
  • Choose models with 3 NPN or 3 PNP outputs, one for each color channel

Download Literature

slc1 Series  
The C-GAGE™ SLC Series Label Sensor is designed to provide accurate detection of labels on web backing. An SLC sensor requires no programming or adjustments. The patent-pending Adaptive Digital Logic (ADL™) system automatically "learns" the label characteristics with the passing of four labels or 250 milliseconds (whichever is greater).
  • No user adjustments – ADL provides revolutionary self-learning capability
  • Continuous automatic internal adjustment of sensing threshold and drift compensation
  • Registration accuracy of ± 0.3 mm (0.012") typical at web speeds up to 1.5 m per second (5' per second)
  • Reliably detects the presence of most types of labels on web backing
     
    • Clear labels on an opaque backing
       
    • Clear labels on a clear backing
       
    • Opaque labels on an opaque backing
       
    • Opaque labels on a clear backing
  • Heavy duty metal housing, 1 mm (0.04") slot

Download Literature