• Featuring EZ-BEAM® technology, the specially designed optics and electronics provide reliable sensing without the need for adjustments
• Convergent mode dc sensors with choice of 10 mm or 20 mm focus point
• High-quality, low-cost replacements for competitive miniature sensors
• Easily-aligned visible red sensing beam
• M2 stainless steel mounting hardware supplied; optional mounting brackets available

• Featuring EZ-BEAM® technology, the specially designed optics and electronics provide reliable sensing without the need for adjustments
• Miniature opposed or convergent mode dc sensors (only 4.3 mm deep)
• Low-cost, high-quality miniaturized package – ideal for confined mounting scenarios
• Visible red sensing beam for easy alignment
• M2 stainless steel mounting hardware included; optional mounting brackets available
• Optional 150 mm Pico-style quick-disconnect pigtail on convergent models

• Featuring EZ-BEAM® technology, the specially designed optics and electronics provide reliable sensing without the need for adjustments
• Extremely compact self-contained miniature sensors
• Opposed and retroreflective sensing modes
• Coaxial optics of retroreflective models eliminate “blind” area at close range
• Visible sensing beam for easy alignment
• Choose dark- or light-operate modes
• Choice of integral cable or quick-disconnect connector

• Miniature right-angle sensors in housings only 10 mm (0.4") deep
• Leakproof IEC IP67 (NEMA 6P); hermetically-sealed optics
• Opposed and diffuse sensing modes
• Stainless steel mounting hardware included

• Featuring EZ-BEAM® technology, the specially designed optics and electronics provide reliable sensing without the need for adjustments
• Economical opposed mode dc sensors in 7.5mm (0.3") thick right-angle housings
• Hermetically-sealed optics
• Stainless steel mounting bracket and hardware included

• Featuring EZ-BEAM® technology, the specially designed optics and electronics provide reliable sensing without the need for adjustments
• Miniature right-angle dc sensors in rugged NEMA 6 (IEC IP67) die-cast metal housings
• Ultra thin: only 8 mm (0.3") deep
• Opposed and diffuse sensing modes
• 2 m or 9 m attached cable; optional Pico-style quick disconnect on diffuse models

• Featuring EZ-BEAM® technology, the specially designed optics and electronics provide reliable sensing without the need for adjustments
• Extremely small self-contained miniature sensors
• Ideal for presence sensing in small area previously accessible only to remote sensors and fiber optic cable
• Visible sensing beam for easy alignment
• Choose dark or light operate models
• Choice of integral cable or quick disconnect connector

• MINI-BEAM performance in a package 1/3 the size of the original
• Opposed, retroreflective, polarized and non-polarized retroreflective, diffuse, divergent, and convergent modes
• Easy push button setup: hold the button for maximum sensitivity, then press for incremental fine-tuning
• LED indicators visible from back and one side of sensor
• DC models only

• Miniature rectangular sensors in two housing styles
• Powerful visible red sensing beam for easy setup and alignment
• Opposed, polarized retroreflective, convergent, diffuse, and plastic fiber optic modes
• Marginal gain indicator with alarm output

• Innovative housing design fits almost any mounting situation
• Opposed, polarized and non-polarized retroreflective, convergent, regular and wide-angle diffuse, laser, plastic or glass fiber optic and adjustable-field sensing modes
• WORLD-BEAM Expert QS18E models offer easy push-button TEACH-mode setup
• 360-degree visible multi-function LED indicator system

• Compact, high-performance sensors with 18mm threaded "nose" (most models)
• Models for ac, dc, or ac / dc ("universal") operation
• Opposed mode, opposed clear plastic detection, diffuse and divergent, polarized and non-polarized retroreflective, convergent, glass and plastic fiber optic modes
• Convergent and fiber optic models offer infrared or visible red, blue, white, or green light source LED: select a color based on your color-differentiation application needs
• SME312 Expert models offer easy, push button TEACH mode setup
• MIAD9 series NAMUR models for use in hazardous environments with approved switching amplifiers having intrinsically safe input circuits
• MINI-BEAM models for clear plastic detection; MINI-BEAM Expert models for clear object detection

• Low-cost, high performance sensors; no adjustments necessary on most models
• Advanced self-diagnostics with separate marginal -gain indicator and alarm output (dc models)
• Three housing styles with two sensor sizes each:
  T18, Q25, S18, and M18 have 18 mm hub/barrel
  T30, Q40, S30, and SM30 have 30 mm hub/barrel
• Opposed, polarized and non-polarized retroreflective, fixed-field, and diffuse modes
• Models for ac or dc power
• 2 m or 9 m attached cable or quick-disconnect fitting
• M18 series: stainless steel M18 x 1 threaded barrel
• S12 series (not shown): opposed mode only, 12 x 1 mm thermoplastic polyester threaded barrel
• SM30 series: M30 x 1.5 threaded barrel sensors for difficult moisture situations

• Compact, self-contained design
• Detects luminescence that is inherent in a material or luminophores that have been added to a material to make it luminescent
• Senses luminescent marks, even on luminescent backgrounds and on reflective surfaces, such as ceramic, metal, or mirrored glass
• Easy-to-set programming options for sensing precision
• Low Cost
• Fast 250-microsecond sensing response time

• Choose models with NPN or PNP discrete outputs

• Self-contained design in a robust, compact metal housing
• Detects luminescence that is inherent in a material or luminophores that have been added to a material to make it luminescent
• Senses luminescent marks, even on luminescent backgrounds and on reflective surfaces, such as ceramic, metal, or mirrored glass
• High sensitivity
• Easy-to-set push-button programming of sensing threshold
• Fast 250-microsecond sensing response time
• Switch-selectable NPN or PNP discrete outputs, plus 0 to 5.5V dc analog output

• Compact, low-cost dc sensors in NEMA 6P (IEC IP67) die-cast housings
• Outstanding immunity to electrical noise
• Marginal gain indicator with alarm output
• QM42 series: opposed, polarized retroreflective, diffuse, short-range adjustable field, and plastic fiber optic modes
• QMT42 series (slightly larger): fixed field and long-range adjustable field modes

• Robust die-cast nickel-plated housing with sealed membrane switch is designed to meet IEC IP67 requirements
• Excellent immunity to noise, including high-speed-switching fluorescent lamps
• Simple single-button set procedure
• Enhanced optical crosstalk avoidance
• Choose dark- or light-operate models
• Choice of integral cable, integral Euro-style or Polyurethane "PUR" pigtail Euro-style quick-disconnect connector

• Rugged sensors in narrow 12.7mm (0.5") wide housings
• Easily stackable for mountable in tight spaces
• Opposed, non-polarized retroreflective, diffuse, convergent, and glass fiber optic modes
• DC operation only

• Long-range adjustable-field background suppression sensor detects objects within a defined sensing field, while ignoring objects located beyond the sensing field cutoff
• Two-turn, logarithmic adjustment of sensing field cutoff point from 0.2 to 2 m; allows easy setting of cutoff point at long range
• Rotating pointer indicates relative cutoff point setting
• Easy push-button or remote programming of light/dark operate and output timing; continuous status indicators verify all settings at a glance
• Models for dc or ac/dc (Universal Voltage) operation

* Note: If range adjustment is set to maximum, sensor will function as a traditional diffuse sensor

• Economical, rugged sensors in Cycolac® ABS housings
• Wiring chamber with dual conduit entrances (gasketed plug provided)
• Opposed, polarized retroreflective, and diffuse sensing modes
• Available with either basic on / off output or programmable output timer (T9 models)
• Mounting bracket included

• Economy, performance, and reliability in a rugged line of sensors with standard limit-switch mounting hole spacing
• Opposed, retroreflective, diffuse, convergent, and glass and plastic fiber optic modes
• Wide choice of standard models for ac, dc, or ac / dc operation
• SM91EN/RN models have enhanced immunity to sunlight
• SMA990 series models have built-in six-digit totalizing counter (no external outputs)
• SMI912 series intrinsically-safe sensors are for use in hazardous locations

• Advanced one-piece sensors with outstanding optical performance
• Extremely rugged design exceeds NEMA 6P and IEC IP67 standards; sensors withstand 1200 psi washdown
• Highly-visible Power, Signal (AID™ system), and Output indicator LEDs
• Standard models accommodate output timing logic or 7-segment LED signal strength display
• Available in opposed, polarized and non-polarized retroreflective, diffuse, convergent, and glass and plastic fiber optic modes
• Models for dc, ac, or ac / dc ("universal") power
• Also available in laser diode retroreflective and NAMUR models

• The BT-1 BEAM-TRACKER is a quick and simple way to evaluate photoelectric system performance
• Receives light from all modulated photoelectric emitters and transmits light to receivers to check system operation
• A valuable tool for locating the center of the beam when installing long-range opposed mode photoelectric sensor pairs
• Locates sources of severe EMI or RFI "noise"
• Low cost, battery operated, completely self-contained

• Totally self-contained visible-beam laser tool simplifies the alignment of any opposed mode sensor pair
• Uses one common 9V battery (included)
• Built-in circular bubble level
• Retorefelctive target material included for easy viewing of the laser spot at long distances
• Brackets included for attachment to Banner MINI-SCREEN, MINI-ARRAY, MICRO-SCREEN and EZ-SCREEN systems

• Used to power dc self-contained sensors for testing purposes
• Designed around a 4-pin euro-style connector
• Powered by three standard 9-volt batteries (27V dc) for long service life
• Bi-colored LEDs indicate sensor output status and type (NPN or PNP)
• Cable adapters are available to convert to pico-style or mini-style connectors
• Four-pin wiring barrier on top of the box allows connection to cabled dc sensors

• Converts 120V ac line voltage to low voltage dc for powering any Banner dc sensor^† which has either 4- or 5-pin Euro-style quick-disconnect (QD)
• Compatible with Banner dc sensors with NPN (sinking) or PNP (sourcing) outputs
• SPS101 models: 5amp-rated SPST relay for switching ac loads or large dc loads
• SPS101S models: optically-isolated SPST solid-state output for switching ac or dc loads
• Models with "Q" suffix require a sensor with a pigtail QD connector; models with "QP" suffix connect to a sensor with either an integral or pigtail quick-disconnect

• Choose from a wide selection of sensor mounting brackets
• Most metal brackets are constructed of stainless steel
• Most non-metallic brackets are molded from reinforced thermoplastic polyester including versatile swivel models

• High-quality acrylic targets, high-temperature targets, and adhesive-backed retroreflective tape
• Comprehensive selection of sizes, shapes, and mounting options