|
Safety switch for hinged guards
Application: These safety switches are suitable for hinged safety guards, which need to be closed to ensure the necessary operational security. The variety of requirements to be found in practice can be met by means of the wide range of safety switches for hinged guards. Depending on the particular version of the switches, small doors and service flaps as well as heavy hinged doors on engineering machines and plants can be protected in such a way as to provide for easy setting up and maintenance. Design and mode of operation: A general advantage of the safety switches shown here is the integral cam within the safety switch. The requirements of EN 1088, such as positive linkage between cam and actuator as well as protection against tampering are thus fulfilled. This combination within the switch provides cost advantage for the user in avoiding the necessity of mounting a specially designed cam. These safety switches are mounted with slow action. Protection class of all the safety switches is IP 67. Ranges ES 95 SB Hinge safety switches - Thermoplastic enclosure Thermoplastic enclosure Double insulated Good resistance to oil and petroleum spirit Actuator heads can be repositioned in steps 4 x 90° Actuator shaft can be turned 360° Bore for shaft Ø 9.5 mm Cable entry Pg 11 or Pg 13.5 available EEx version available T.C 235 Flap safety switches - metal enclosure Metal enclosure Versions available for left-hand (T3C 235), right-hand (T5C 235) and swing-doors (T4C 235) Cable entry Pg 13.5 Good resistance to oil and petroleum spirit Actuator heads can be repositioned in steps 4 x 90° Opening angle 180° Stainless steel actuator T.C 236 Flap safety switches - Thermoplastic enclosure Thermoplastic enclosure Versions available for left-hand (T3C 236), right-hand (T5C 236) and swing-doors (T4C 236) Double insulated Cable entry Pg 13.5 Good resistance to oil and petroleum spirit Actuator heads can be repositioned in steps 4 x 90° Opening angle 180° Stainless steel actuator TV.S 335 Hinge safety switches - metal enclosure Metal enclosure Good resistance to oil and petroleum spirit Actuator heads can be turned in steps 4 x 90° using Torx T 20 srewdriver and pin Actuator shaft can be turned 360° 1 cable entry LED version available TV8S 521 Hinge safety switches - metal enclosure Metal enclosure Mounting independent of hinge Variable mounting on hinged side Rail-mounting possible 2-channel, alternating monitoring Good resistance to oil and petroleum spirit Actuator shaft can be turned 360° 2 cable entires Switching point subsequently adjustable using hinge L For doors hinged on left or right-hand side Push-in system (toothed shaft) TESZ 1102 / TESZ 1110 Hinged Door Interlock Thermoplastic enclosure Simple mounting, especially on 40 mm profiles Good resistance to oil and petroleum spirit 2 cable entires For doors hinged on left or right-hand side |
|
If you can't find what you are looking for
Call Us! or go to the
Schmersal Home Page |
|
Seltrol is a stocking distributor of a wide
variety of industrial automation equipment. We are located in South
Carolina and service SC and NC. Our inside and outside sales staff are
available to assist you with your application. We provide technical -
application support for all of our products.
|
|
Schmersal Safety Switches
|