Rail-mounted terminal blocks Screwless rail-mounted terminal blocks are available with cross-section ranging from 0,08 mm˛ to 95 mm˛ (AWG 28-000)

Application areas:
- In switchgear cabinets, terminal boxes and distribution boards
- Machine construction
- Production lines for the automobile industry
- Railway rolling stock
- Shipbuilding
- Automation
- Building installations
- Power generation and distribution


Advantages:
- Fast and maintenance-free connection regardless of the skills of the installer
- Vibration and shock resistant
- Different versions of terminal blocks and accessories are available according to the type of application
- Approvals according to international standards and to the standards of big customers and groups of companies
- The automatic wiring machine CC-Matic® makes it possible to wire your components with CAGE CLAMP® connection which includes splaying protection, colouring and marking of the conductor.
- The CAGE CLAMP® connection is suitable for all commonly used copper conductors with or without ferrules. 


Through terminal blocks
- Screwless through terminal blocks are available from 0,08 mm˛ to 95 mm˛ (AWG 28 - 000)
- 2-, 3-, 4-conductor front-entry through terminal blocks
- One CAGE CLAMP® connection for each conductor
- Insulated jumper system, commoning with staggered and step-down jumpers


Multilevel rail-mounted terminal blocks
- Save space on the carrier rail
- Cross-sections from 0,08 mm˛ to 4,0 mm˛ (AWG 28 - 12)
- Commoning in vertical and horizontal direction
- With electric motor wiring terminal blocks it is possible to connect a 3 phase motor on only 6 mm width


Terminal blocks with electronic components
- For conductor cross-sections up to 4 mm˛ (AWG 12)
- Multiple wiring possibilities
- Equipped with diodes, LEDs, gas-type surge arresters, varistors, supressor diodes, potentiometers and resistors
- Clear marking of terminal blocks with special functions



Disconnect / test terminal blocks
- For cross-sections from 0,08 mm˛ to 4,0 mm˛ (AWG 28 - 12)
- Maximum current capacity up to 30 A
- The switching status is exactly defined according to a fixed position
- An integrated test slot for test pins of 2,0 mm / 2,3 mm diameter is available depending on the version



282 series disconnect / test terminal blocks for use with voltage transformer circuits
- Conductor cross-sections from 0,2 mm˛ to 6,0 mm˛ (AWG 24-10)
- Automatic short circuiting of the transformer by operation of the disconnect link.
- A lock-out seal can be used on the disconnect link
- A large range of accessories is available such as for example : lock-out, interlocking link and locking cover
- Touchproof test sockets 


Fuse terminal blocks
- Conductor cross-sections from 0,08 mm˛ to 6,0 mm˛ (AWG 28-10)
- For miniature metric fuses and mini-automotive blade-type fuses
- Pivotable fuse holders make it easier to change the fuse and to store a spare fuse 
- Either with or without blown fuse indication
- 10 A or 30 A maximum current capacity


Rail-mounted terminal blocks with FIT CLAMP connection, series 290 ( insulation displacement connection technique )
- Conductor cross-sections from 0,34 mm˛ to maximum 1,5 mm˛
- 33% of the wiring time can be saved compared to the CAGE CLAMP® connection
- Easy operation using a standard screwdriver 
- The shape and the accessories of the 290 series rail-mounted terminal blocks are similar to the 280 series (WAGO rail-mounted terminal blocks with CAGE CLAMP® connection up to 2,5 mm˛ (AWG 14)).
- The rail-mounted terminal blocks with FIT CLAMP connection and those with CAGE CLAMP® connection have the same width of only 5 mm : time saving and space saving ! 

High current rail-mounted terminal blocks up to 95 mm˛ (AWG 000)
- 232 A nominal current
- The WAGO high current terminal blocks can be easily snapped on both sides onto the carrier rail.
- Operating with a standard hexagon socket screw key 
- The clamping unit can be held in the open position with the help of a latch which makes the wiring of conductors with large cross-sections easy and secure even under difficult handling conditions.
- 2-pole screwless push-in jumpers with nominal current carrying capacity
- Automatic contacting ground (earth) terminal block
- Integrated 4 mm test socket 

Sensor and actuator terminal blocks
- For cross-sections ranging from 0,08 mm˛ to 2,5 mm˛ (AWG 28-12)
- LEDs show the switching condition
- Conductors with very small cross-sections can be wired into sensor terminal blocks without special preparation.
- Screwless push-in jumpers 
- The disconnection of the signal path or the fuse protection of the sensor and actuator 24 V or 230 V power supply are made possible for some special versions.

Ground (earth) conductor terminal blocks
- Ground (earth) conductor terminal blocks are simply snapped onto the carrier rail
- The electrical connection to the rail is made automatically
- This applies to all the WAGO ground (earth) conductor terminal blocks with cross-sections ranging from 0,08 mm˛ to 95 mm˛ (AWG 28-000)

 
Technical data:
- Terminal blocks for 2, 3 and 4 conductors per potential
- Conductor introduction and terminal block operation from the top, i.e. in full view of the operator
- Pluggable, insulated jumper system
- The CAGE CLAMP® and the CAGE CLAMP® COMPACT connection make quick, vibration-proof and maintenance-free connections of all commonly used copper conductors (solid, stranded, fine-stranded) with or without ferrules.
For more informaiton please refer to our general catalogue or the WAGO CD-ROM.
Seltrol is a stocking distributor of a wide variety of industrial automation equipment. We are located in South Carolina and service SC and NC. Our inside and outside sales staff are available to assist you with your application. We provide technical - application support for all of our products.
Wago Terminal Strip Products