|
Magnetic Motor Starters
Technical Specifications Fractional to 900 HP Nema size 00 through 5 (200HP, 630Amp) Single or three phase Reversing or non reversing UL, CSA, and CE compliant Features High impact, fungus inert, moisture resistant housing 100% stainless steel springs Permanent air-gap notch in "E" magnets High ambient to 60°C 10,000,000+ mechanical life 1,000,000 operations electrical life Positive guided for safety circuits Single-phasing protection Benefits Motor load matching saves money Durable, reliable Exceeds all IEC current ratings Available from stock to 900HP |
|
Power Switching Contactor
Technical Specifications 16 through 1250 Amps Fractional to 900 HP Three or four power poles Voltage tolerance: -25% to +10% on AC coils -15% to +10% on DC coils UL, CSA, and CE compliant Features Conservative rating HP vs Amps for longer life Integral or snap on auxiliaries Permanent air-gap notch in "E" magnets High ambient to 60°C 10,000,000 operations mechanical life 1,000,000 operations electrical life Strong spring loaded din mount mechanism Benefits Wide range coils, greater protection on low voltages Exceeds all IEC current ratings Meets and/or exceeds all NEMA current ratings Approved for critical safety applications High current switching-small footprint Drop in replacement for all IEC brands |
|
Thermal Overload Relays
Technical Specifications 0.12 through 400 Amp relay settings -20 through +60°C ambient compensated temperature range 3 poles Features Normally Open (alarm) and Normally Closed (trip) isolated contacts NEMA class 10 design for "T" frame motors Ambient compensated bimetalic windings Single-phasing sensitivity Benefits Can be directly plugged into contactor or panel mounted Wide temperature range Consistent trip accuracy Reliable operation with direct heated bimetals Precision operation compared to old separate heater systems |
|
Control Relays
Technical Specifications 600 volt rated 16 or 20 Amp 4 through 10 poles Voltage tolerance: -25% to +10% on AC coils -15% to +10% on DC coils UL, CSA, & CE compliant Features Din rail or panel mountable Positive guided contacts 100% stainless steel springs 30,000,000 operations Add on poles, timers, and latch kits Benefits Positive guided for safety circuits Wide range coils, greater protection in low voltages Wide temperature range to 60° Field flexible with add-ons Compact design saves space |
|
Circuit Breakers
Technical Specifications 0.5 through 125 Amps 1 through 4 poles AC or DC current 600 volts Interrupting capacity of 6 or 10 KA UL, CSA, and CE compliant Features Different trip characteristics to preform extremem protection duties Trip characteristics B, C, and D: B-primarily for lighting and control circuits C-motors and transformers D-heavy starting motors for undesired early tripping Finger safe design Larger size input box terminal for ease of connection Din rail mountable Field mountable side mount auxiliary & trip auxiliary contacts Benefits No supplementary thermal fuses needed Adding residual current trips, remote control, and auxiliary contacts saves time and money Color coded switch position indicators add to ease of use |
|
Motor Circuit Protectors
Technical Specifications Up to 50 KA Magnetic instantaneous trip as well as inverse time thermal trip External disconnect handle options single phase, two poles or three phase, three poles Continuous current current rating to 250 Amps UL, CSA, & CE compliant Features Internal or external field mountable auxiliary contacts Panel or din rail mountable Field mountable plug on shunt or undervoltage trip Padlockable off, stop button Available outdoor IP55 enclosure Benefits Single phase fault sensitive High operational safety factor compliant to VDE0160T 100 Setting exact full load current provides motor protection Accessible terminals for easy wirings UL/CSA approved Finger safe design |
|
Heavy Duty Cam Switches
Technical Specifications 11 sizes from 25-1200 Amps Up to 12 positions and 12 poles 600 volt AC & DC ratings 1000 volt AC from 400-1200 Amps (isolation) IP65 dust-tight/water-tight operator handles UL, CSA, CE Compliant All motorload switching rated Features Exclusive auto aligning shaft system Back of hand and finger safer terminals according to CE. Up to 12 poles and 12 positions Positive opening contacts Load make/load break Front, base, and single hole mounting Benefits Horse power rated to help closer match to applications Custom engraved nameplates to meet any application Rugged design makes VN cams ideal for heavy industrial duty 1 to 3 day delivery for most requirements (through 200 amp) |
|
Disconnect Switches
Technical Specifications 25 to 630 Amps 3, 4 or 6 poles Undervoltage trip daisconnects from 30 to 150 Amps. IP 65 dust tight and water tight operator handles UL, CSA, CE compliant Features Patented Auto-Aligning Shaft System Back of hand and finger safer terminals according to VDE 8" deep shaft standard Shaft extension to allow up to 12" deep enclosure Wide handle selection to meet emergency specifications Positive opening contacts Load make/Load break Front, base, and single hole mounting Benefits Horsepower rated to closer "match the application" Field addable accessories including: Auxiliaries Power poles Neutral poles Durable and Reliable |
|
Signaling Devices
Tower Sector Simple and practical by design. A totally modular stack light system that requites no tools to assemble. Simply by connecting the base and various light modules, the electrical connection is automatic and complete. Choose from standard incandescent, LED or xenon strobe light modules. A horn module can be added to Tower Sector to fully command attention. Modular "No Tools Required" Assembly 3 Light Module Type Options: Standard Incandescent, LED, or Xenon Strobe Continuous or Built-In Flash Modules Available Five Interchangeable Lens Colors Variable Sound Horn Via Dip Switches Available at Top of Stack or Stand Alone with Base Module Full 360° Visibility Rotating Beacon Available NEMA 4X / IP66 Towerlites Luxor Towerlites are comprised of four individual diameter sizes, each identical in design and function. An audible horn as well as a rotating beacon can be incorporated into the Towerlite stack. Towerlite stack lights also offer a vast array of mounting types and accessories. Combine these features with the choice of sizes, and there is sure to be a Towerlite stack light to fit any application. 4 Diameter Sizes: 1.77" through 5.35" 4 Bulb Wattages: 4W, 10W, 25W or 40W 9 Mounting Types & Accessories Maximum 6 Lights High 6 Interchangeable Colors Full 360° Visibility Safe, Quick Bulb Replacement Available Integrated Horn & Rotating Beacon UL, CSA, CE |
|
PushButtons
Technical Specifications Miniature 22mm and Full 30mm Size Nema 4, 4x, 12, 13 & IP65 600 VAC, 300 VDC Max UL A600 10 Amp UL, CSA, CEI, IEC, VDE and BSI approved Features Heavy Duty Dust, Oil & Hose Test Water Tight One Contact Block System for Both Full Size and Miniature Buttons Versatile Modular, Snap-Lock together Components with Interchangeable Operators Wipe Action Contacts Rugged Construction Benefits Maximize Inventory with Interchangable Parts High Durability Aggressively Competitive Cost savings with D30 full size PB's D22 7/8" miniature PB's |
|
Seltrol is a stocking distributor of a wide
variety of industrial automation equipment. We are located in South
Carolina and service SC and NC. Our inside and outside sales staff are
available to assist you with your application. We provide technical -
application support for all of our products.
|
|
AEG Controls
|