If you can't find what you are looking for Call Us! or go to the
Red Lion  Home Page
Seltrol is a stocking distributor of a wide variety of industrial automation equipment. We are located in South Carolina and service SC and NC. Our inside and outside sales staff are available to assist you with your application. We provide technical - application support for all of our products.
Red Lion Controls PID Process Controllers

Modular Controller
 
Red Lion’s Modular Controller series offers a cost effective solution to integrating multi-zone PID control, data acquisition and I/O into your PC, DCS or PLC control system. You can drag and drop controller data to PLC registers in seconds using point-and-click data mapping from an extensive menu of built-in serial and Ethernet drivers. No tedious PLC code to write.
 

 

Instantly Ethernet-enable your PLC for free! Not only are programming costs slashed, you can eliminate costly add-on I/O and analog cards and solve applications simply using an inexpensive brick PLC.
The high-density DIN rail design saves panel space and eliminates cutouts. All modules can be hot-swapped -- the master automatically programs a replaced module.

 
CSMSTR
 
  • Provides power and communications to modules through backplane connector
  • Stores module configuration information, and automatically reprograms replaced modules
  • Auto module identification and addressing minimizes configuration time
  • Fully isolated design provides reliable operation
  • Serial ports provide a variety of integration methods
  • Extensive built-in serial driver list allows easy data mapping to plcs
  • 10-base-t ethernet connection provides networking capability
  • Windows® configuration software
  • Supports up to 16 Modular Controller Modulkes
 
:: Documentation ::
CSMSTR Data Sheet/Manual 455KB
 
 
:: Dimension Drawings ::
CSMSTR Dimension Drawing 16KB
CAD Drawing (DWG) 139KB
 
 
:: Cables and Drivers ::
Modular Controller
 
 
:: Software ::
Crimson 1.0
 
 
 
 
 
 
 
CSPID PID CONTROL MODULES
 
  • Dedicated single and dual PID modules for the Modular Controller series
  • Hot-swappable replacement reduces downtime
  • Auto addressing minimizes configuration time
  • Fully isolated design provides reliable operation
  • Pid control with reduced overshoot
  • Universal inputs accept tc, rtd, 0-10 v and 0/4-20 mA signals
  • On demand auto-tuning of PID settings
  • DC analog output (optional, CSPID1 only)
  • Heater current input (optional) ensures detection of heater circuit failure
  • Windows® configuration software
 
:: Documentation ::
CSPID Data Sheet/Manual 506KB
 
 
:: Dimension Drawings ::
CSPID Dimension Drawing 19KB
CAD Drawing (DWG) 176KB
 
 
:: Accessories ::
DIN-Rail Relays
Current Transformers
 
 
:: Sensors ::
Temperature Sensors
 
 
:: Software ::
Crimson 1.0
 

CSTC8 / CSRTD6 TEMPERATURE INPUT MODULES
 
  • Dedicated high density temperature input modules for the Modular Controller series
  • Models available for thermocouple or RTD inputs
  • Thermocouple input version provides independent type selection for each input
  • Unused inputs can be disabled to increase overall reading rate
  • Ideal for data-acquisition applications
  • Auto addressing minimizes configuration time
  • Can be used in conjunction with any CS series modules
 
:: Documentation ::
CSTC8/CSRTD6 Data Sheet/Manual 247KB
 
 
:: Dimension Drawings ::
Module Dimension Drawing 19KB
CAD Drawing (DWG) 176KB
 
 
:: Sensors ::
Temperature Sensors
 
 
:: Software ::
Crimson 1.0
 
 
 
 
 

CSINI8 / CSINV8 ANALOG INPUT MODULES
 
  • Dedicated high density input modules for the Modular Controller series
  • Models available to accept ±10V and 0/4-20 mA inputs with per channel input options
  • Unused inputs can be disabled to increase overall reading rate
  • Ideal for data-acquisition applications
  • Auto addressing minimizes configuration time
  • Can be used in conjunction with any CS series modules
 
:: Documentation ::
CSINI8/CSINV8 Data Sheet/Manual 247KB
 
 
:: Dimension Drawings ::
Module Dimension Drawing 19KB
CAD Drawing (DWG) 176KB
 
 
:: Sensors ::
Temperature Sensors
 
 
:: Software ::
Crimson 1.0
 
 
 
:: CSDIO ::  
 
  • Adds remote I/O capability to the Modular Controller series
  • Eight input, six output digital module
  • Inputs isolated from outputs
  • Inputs independently switch selectable for sink or source signals
  • Inputs independently configurable for high or low active state
  • Inputs independently switch selectable for high or low frequency signals
  • Relay or NFET output models available
 
:: Documentation ::
CSDIO Data Sheet/Manual 441KB
 
 
:: Dimension Drawings ::
CSDIO Dimension Drawing 19KB
CAD Drawing (DWG) 176KB
 
 
:: Accessories ::
DIN-Rail Relays
 
 
:: Sensors ::
Proximity Sensors
Photo Electric Sensors
 
 
:: Software ::
Crimson 1.0
 
 
 
 
 
 
 
 

DIN RAIL MOUNTED PID CONTROLLERS
DLC

        
 
  • Modular Building Block for Multi-Zone Process Control
  • Two Independent PID Control Loops
  • PID Control with Reduced Overshoot
  • Universal Inputs accept TC, RTD, 0-10 V and 0/4 to 20mA
  • On Demand Auto-Tuning of PID Settings
  • Two DC Analog Outputs (Optional)
  • Windows™ Configuration Software
  • RS485 Modbus™ Protocol
 
pdf DLC Data Sheet/Manual 1097KB
 
 
 
 
 
   
DLCD

        
 
  • Modular Building Block for Multi-Zone Process Control
  • Two Independent PID Control Loops
  • PID Control with Reduced Overshoot
  • Universal Inputs accept TC, RTD, 0-10 V and 0/4 to 20mA
  • On Demand Auto-Tuning of PID Settings
  • Two DC Analog Outputs (Optional)
  • Windows™ Configuration Software
  • RS485 Modbus™ Protocol
 
pdf DLCD Data Sheet/Manual 232KB
 
 
 
 
 
 
   
DLCN

        		  
 
  • Modular Building Block for Multi-Zone Process Control
  • Two Independent PID Control Loops
  • PID Control with Reduced Overshoot
  • Universal Inputs accept TC, RTD, 0-10 V and 0/4 to 20mA
  • On Demand Auto-Tuning of PID Settings
  • Two DC Analog Outputs (Optional)
  • Windows™ Configuration Software
  • RS485 Modbus™ Protocol
 
pdf DLCN Data Sheet/Manual 308KB
 
 

 

PANEL MOUNTED PID CONTROLLERS



 
T48

        
 
  • 50 mm x 50 mm
  • Dual 4 Digit Display, 0.4" (10 mm) Red and 0.3" (7.6 mm) Green
  • Relay, SSR Drive, Triac Outputs
  • Linear DC Outputs
  • Heat/Cool
 
pdf T48 Data Sheet 332KB
 
 
 
 
 
   
T16

        
 
  • PID Control with Reduced Overshoot
  • Accepts TC and RTD Inputs
  • On Demand Auto-Tuning of PID Settings
  • DC Analog Output (Optional)
  • PC or Front Panel Programming
  • PC Configurable with TP16KIT
 
pdf T16 Data Sheet/Manual 1351KB
 
 
 
 
 
   
TCU

        
 
  • 97 mm x 50 mm
  • Dual 4 Digit, 0.4" (10 mm) LED, 0.3" (7.6 mm) LED
  • Auto-tune
  • Relay, SSR Drive, Triac Outputs
  • Linear DC Outputs
  • Heat/Cool
 
pdf TCU Data Sheet 394KB
 
 
 
 
 
   
TSC

        
 
  • 97 mm x 50 mm
  • Dual 4 Digit, 0.4" (10 mm) LED, 0.3" (7.6 mm) LED
  • 0.15% Accuracy
  • Ramp/Soak
  • Event Outputs
  • Multi-setpoint
  • Relay, SSR Drive, Triac Outputs
  • Linear DC Outputs
 
pdf TSC Data Sheet 325KB
 
 
 
 
 
   
P48

        
 
  • 50 mm x 50 mm
  • Dual 4 Digit Display, 0.4" (10 mm) Red and 0.3" (7.6 mm) Green
  • Relay, SSR Drive, Triac Outputs
  • Linear DC Outputs
 
pdf P48 Data Sheet 210KB
 
 
 
 
 
   
P16

        
 
  • PID Control with Reduced Overshoot
  • Accepts 0-10V and 0/4-20mA Signals
  • On Demand Auto-Tuning of PID Settings
  • DC Analog Output (Optional)
  • PC or Front Panel Programming
  • PC Configurable with TP16KIT
 
pdf P16 Data Sheet/Manual 1351KB
 
 
 
 
 
   
PCU

        
 
  • 97 mm x 50 mm
  • Dual 4 Digit, 0.4" (10 mm) LED, 0.3" (7.6 mm) LED
  • Auto-tune
  • Relay, SSR Drive, Triac Outputs
  • Linear DC Outputs
 
pdf PCU Data Sheet 341KB
 
 
 
 
 
   
PSC

        
 
  • 97 mm x 50 mm
  • Dual 4 Digit, 0.4" (10 mm) LED, 0.3" (7.6 mm) LED
  • 0.15% Accuracy
  • Ramp/Soak
  • Event Outputs
  • Multi-setpoint
  • Relay, SSR Drive, Triac Outputs
  • Linear DC Outputs
 
pdf PSC Data Sheet 277KB