Seltrol is a stocking distributor of a wide variety of industrial automation equipment. We are located in South Carolina and service SC and NC. Our inside and outside sales staff are available to assist you with your application. We provide technical - application support for all of our products

Yaskawa / Magnetek AC Inverters and AC Vector Drives

 

F7 Drive
1/2 - 500 Horsepower Industrial Workhorse

 

Specifications and Features for F7 Drive
 

The F7 Drive: This AC drive is the Industrial Workhorse that can handle every conventional application found within the typical industrial plant, from simple variable torque pumping to sophisticated networked material handling. All of this is possible with the smart and flexible design platform of the F7, providing both Normal and Heavy Duty ratings, four modes of control, network communication options, application-specific drive software, and an array of standard and optional input/output choices.

The F7 is factory-programmed and ready to run. For operational simplicity and clarity, the LCD operator display has 5 lines x 16 characters. It can be set to any of 7 languages. The keypad is intuitive and includes parameter copying to move a chosen set of parameters from one drive to another. If the application requires programming, the F7 makes it easy. Parameters are grouped in easy to use sets; quick start and advanced. To enhance parameter and data management, DriveWizard software for the PC is available at no charge, for upload/download, trending, and graphing.

This drive is designed for tough industrial environments. It is rugged and reliable, with an MTBF of 28 years. A variety of enclosure options provide the right environmental protection. The dual ratings, Normal and Heavy duty, enable the most economical match of overload capacity and starting torque for the application. Providing the right fit to power requirements is also easy with 208/240 and 480 volt ratings, built-in bus choke above 30 HP, 12-pulse capability above 30 HP, common bus capability, and regeneration options. Patented high slip braking can eliminate the need for dynamic braking resistors for high inertia loads. Other features include motor auto-tuning and a wide range of configurable options, such as breakers and fuses.

To provide the optimum control method, the F7 can operate in conventional V/f, V/f with encoder feedback, open loop vector, or closed loop vector mode. Drive performance can be further enhanced for a specific application with optional software.

The F7 supports the industry’s open architecture, open connectivity demands with network communications choices such as DeviceNet, Profibus-DP, and others. Drive coordination with other equipment is simplified with inputs and outputs for digital pulse train, 4 to 20 mA, -10 to +10 V, and an assortment of programmable contacts.

For new installations or retrofits, the F7 is truly the Industrial Workhorse, perfect for every conventional application…and even some unconventional ones

 

 
Performance Features
  • Ratings:
    0.5 to 150 HP, 208 to 240 VAC
    0.75 to 500 HP, 480 VAC 
  • Overload capacity:
    150% for 1 min heavy duty, nominal 110% for 1 min normal duty
  • Starting torque:
    150%, at 1Hz (V/f), at 0.5 Hz (open loop), at 0.3 Hz (closed loop)
  • Output frequency: 
    0.01 to 300 Hz for heavy duty, 400 Hz for normal duty
  • Controlled speed range:
    40:1 (V/f), 50:1 (V/f with PG), 200:1 (open loop), 1000:1 (closed loop)
  • Speed regulation:
    2-3% (V/f), 0.02% (V/f with PG), 0.2% (open loop), 0.01% (closed loop)
  • Speed/frequency resolution:
    0.01% with digital reference, 0.1% with analog reference, 0.1 Hz with Modbus
  • Electronic reversing
  • Adjustable accel/decel: 0.1 to 6000 sec
  • Stall prevention
  • Drive efficiency: 96 to 98%
  • Displacement power factor: 0.98
  • Power loss ride-thru: 2 sec
  • Inertial ride-thru
  • Selectable auto restart after momentary power loss
  • Programmable auto restart
    (0 to 10 attempts) on re-settable fault
  • Critical frequency rejection: 3 selectable, adjustable bands


Protective Features

  • DC bus CHARGE indicator
  • Optically-Isolated controls
  • Phase-to-phase / phase-to-neutral short circuit protection
  • Ground fault protection
  • Electronic motor overload (UL)
  • Current and torque limit
  • Over-torque / under-torque detection
  • Fault circuit: over-current, over-voltage, and over-temperature
  • Input/output phase loss


Inputs and Outputs

  • Analog inputs:
    -10 to +10 VDC (20K ohms) or 4 to 20 mA (250 ohm)
  • Analog outputs:
    -10 to +10 VDC or 4-20 mA proportional to output parameters
  • Digital pulse train input/output (32 KHz max)
  • Digital Inputs: 8 multi-function
  • Programmable outputs: Three form A
  • Fault contacts: form C
  • RS-485/422 communication terminals
     

Additional Features for V/f

  • Torque boost: full range, auto
  • V/f ratio: 15 preset, one adjustable
  • Slip compensation
 Design Features
  • LCD keypad display, 5 lines x 16 characters, backlit, 7 languages, copy function
  • Multi-speed settings: 17 available
  • Setpoint (PID) trim control
  • Signal follower: bias and gain
  • Up / down / hold reference (digital M.O.P.)
  • Timer function; on/off delay
  • 32-bit microprocessor logic
  • Easy access, quick start parameter groups
  • Nonvolatile memory/program retention
  • Flash memory for update and custom applications
  • 24 VDC control logic
  • DC injection braking, adjustable level
  • Dynamic braking
  • High-slip braking
  • Ramp to stop or coast to stop
  • Dual motor parameter sets
  • Synchronized start into rotating motor
  • Motor auto-tuning, static and dynamic
  • Common bus capability
  • DC link choke: 30 to 150 HP at 240 VAC, 30 to 500 HP at 480 VAC
  • Twelve-pulse capability: 30 to 150 HP at 240 VAC, 30 to 500 HP at 480 VAC
  • Terminal strip, quick disconnect
  • Split cover for easy wiring
  • Plug-in heat sink fan


Service Conditions

  • Ambient service temperatures:
    -10 to 40 0C (1040F) NEMA 1, to 450C (1130F) protected chassis
  • Humidity: non-condensing 95%
  • Altitude: to 3300 feet (1000 meter)
  • Input voltage: +10% / -15%, 3 phase
    200 to 240 VAC, 380 to 480 VAC
  • Enclosure: NEMA 1 or protected chassis (other options)
  • Input frequency: 50/60 Hz ± 5%
  • 3-phase, 3-wire phase insensitive
  • Vibration: 1G, (10 to 20Hz), 0.2G (20 to 50Hz)


Standards & Reliability

  • UL, cUL & CE listed
  • IEC: 146A
  • MBTF: Exceeds 28 years
  • Tested on fully-loaded motors
  • Surface mount technology

 

 

Documentation
Number
Title   
Type 
 
Rev Date Size
EZZ006543 Making Yaskawa Inverter Products Conform with the EMC Directive Technical Manuals 4/4/2002 353 KB
IG.AFD.12 Installation Guide for Profibus DP Option CM061 Installation Guides 7/1/2004 1.1 MB
IG.AFD.13 Installation Guide for DeviceNet Option Card CM059 Installation Guides 7/1/2004 124 KB
IG.AFD.14 Installation Guide for DeviceNet Option Card CM05X Installation Guides 7/1/2004 109 KB
IG.AFD.17 Installation Guide for Modbus Plus Option Card CM071 Installation Guides 7/1/2004 1.8 MB
IG.AFD.20 Installation Guide for LonWorks Option Installation Guides 7/1/2004 94 KB
IG.AFD.25 Installation Guide for EthernetModbusTCP/IP Option CM090 Installation Guides 7/1/2004 121 KB
IG.AFD.50 Installation Guide for Pressure Transducer 3-15 PSI Analog Input Option Card AI-010 Installation Guides 7/1/2004 147 KB
IG.AFD.51 Installation Guide for Analog Ouput Option Card AO-08 AO-12 Installation Guides 7/1/2004 63 KB
IG.AFD.52 Installation Guide for Isolated Analog Output Option Card AO-001 Installation Guides 11/3/2004 89 KB
IG.AFD.53 Installation Guide for Analog Input Option Card AI-14U Installation Guides 7/1/2004 44 KB
IG.AFD.54 Installation Guide for Analog Input Option Card AI-14B Installation Guides 7/1/2004 81 KB
IG.AFD.55 Installation Guide for Isolated Analog Input Option Card AI-040 Installation Guides 7/1/2004 80 KB
IG.AFD.56 Installation Guide for Digital Output Option Card DO-08 Installation Guides 7/1/2004 108 KB
IG.AFD.57 Installation Guide for Digital Output Option Card DO-02C Installation Guides 7/1/2004 113 KB
IG.AFD.58 Installation Guide for Digital Input Option Card DI-08 Installation Guides 7/1/2004 49 KB
IG.AFD.59 Installation Guide for Digital Input Option Card DI-16H2 Installation Guides 7/1/2004 68 KB
IG.AFD.60 Installation Guide for Encoder Feedback Option Card PG-X2 Installation Guides 7/1/2004 114 KB
IG.AFD.61 Installation Guide for Dual Encoder Feedback Option Card PG-W2 Installation Guides 7/1/2004 101 KB
IG.AFD.62 Installation Guide for Analog Input Trim Potentiometer Option Card AI-001 Installation Guides 7/1/2004 31 KB
IG.AFD.63 Installation Guide for 120 VAC Interface Option Card DI-001 Installation Guides 10/3/2004 63 KB
IG.F7C.01 Installation Guide for Heatsink Filter Kit Option for F7 Configured Drive Installation Guides 3/5/2004 87 KB
TM.AFD.12 Technical Manual for Profibus-DP Option CM052 Technical Manuals 1/31/2004 2.4 MB
TM.AFD.13 Technical Manual for DeviceNet Option CM059 Technical Manuals 5/1/2004 929 KB
TM.AFD.14 Technical Manual for DeviceNet Option CM05x Technical Manuals 4/1/2004 523 KB
TM.AFD.20 Technical Manual for LonWorks Option Technical Manuals 3/30/2004 479 KB
TM.DW.03 DriveWizard 6.0 Software User Manual Technical Manuals 9/14/2004 1.6 MB
TM.F7.01 F7 DRIVE USER MANUAL Technical Manuals 10/15/2004 3.9 MB
TM.F7.02 F7 Drive Programming Manual Technical Manuals 11/1/2004 1.7 MB
TM.F7.11 Technical Manual for F7 Parameter Access Technical Manuals 2/1/2004 2.1 MB
TM.F7SW.056 F7 Drive Software Technical Manual 1500 Hz Output Frequency Technical Manuals 7/1/2004 1.3 MB
TM.F7SW.064 F7 Drive Software Technical Manual Electronic Lineshaft Technical Manuals 7/1/2004 1.4 MB
TM.F7SW.076 F7 Drive Software Technical Manual Differential PID for Gas Well Technical Manuals 7/14/2004 49 KB
YEA-TOE-S616-55.1 Instruction Manual Varispeed-F7 Spec A Technical Manuals 3/1/2001 6.8 MB
YEA-TOE-S616-55.3 Instruction Manual Varispeed-F7 Obsolete manual for F7U Technical Manuals 10/1/2001 6.2 MB

 

G7 Drive
1/2 - 500 Horsepower The Ultimate Drive Solution

Specifications and Features for G7 Drive
 

This amazing AC drive is the ultimate performance solution with increased speed and torque response to provide servo-like performance from an induction motor. In addition, the G7 drive includes the world’s first Inverter architecture that eliminates or minimizes the installation problems associated with IGBT switching on 480 volt systems and protects the entire motor-drive system.

G7 drive performance makes it the ideal drive for high performance speed, torque, or position control applications. Several control modes are provided. In open loop vector mode, the latest flux observer algorithms extend speed range and provide maximum starting torque. In closed loop vector mode, 0.01% speed regulation and 1000:1 control range can be achieved. Zero-servo capability provides position control at zero speed.

The G7 drive has the world’s first 480V 3-Level Inverter architecture for total system protection. This patented 3-Level architecture can eliminate peripheral components typically required to solve installation problems sometimes encountered on 480 volt systems. The G7 allows motor operation at very long cable lengths, meeting NEMA MG1 Part 31, with peak voltage being 30% less than conventional. With motor bearing current being typically 50% less than standard inverters, the G7 provides four times the motor bearing life. Audible motor noise on the 480 volt G7 drive is 5-10 dB (20%) less than the prior generation drive, even when operating at half the carrier frequency. Common mode current is half that of conventional drives. The G7 power section includes built-in bus choke (most ratings), 12-pulse input capability (most ratings), common DC bus capability, and regeneration options.

The G7 drive has three autotuning methods to optimize motor control, including the new static autotuning which does not require load decoupling nor motor rotation. The LCD operator displays 5 lines x 16 characters, in any of 7 languages. The keypad is intuitive and includes memory for parameter settings, making it easy to transfer settings from one drive to another. To further aid in parameter management, DriveWizard™ software for the PC is available at no charge, for upload, download, archiving, trending, and graphing.

The G7 drive has a large programming feature set to handle sophisticated industrial applications. If the standard feature set does not meet your specific requirement, the G7 can be programmed using DriveWorksEZ™. This is a PC-based, object-oriented, graphical icon programming tool that is friendly to the user. The drive firmware can also be modified by custom or prewritten application-specific modules such as Motion Control or Electronic Lineshaft.

The G7 drive supports the industry’s preference for open network architecture and connectivity with network choices such as DeviceNet, Profibus-DP, Ethernet, and others.
 
The G7 is not intended for the simple, routine AC drive application, it is for the challenges. The G7 drive offers the ultimate performance, the best system protection, and the most flexible configurations of any drive available.

 

 
Performance Features
  • Ratings: 0.5 to 150 HP, 240 VAC
    0.5 to 500 HP, 480 VAC
  • Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
  • Starting torque: 150% at frequency;
    1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
  • Output frequency: 0.01 to 400 Hz
  • Output frequency resolution: 0.001 Hz
  • Speed control range:
    40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
  • Speed regulation:
    1.0% (V/f), 0.2% (open loop vector),
    0.01% (closed loop vector)
  • Speed response: 60 Hz
  • Torque response: 300 Hz
  • Speed reference resolution:
    0.01 Hz with digital reference,
    0.03 Hz with analog reference,
    0.01 Hz with network reference
  • Speed/Torque/Position control
  • Zero-servo mode
  • Adjustable accel/decel: 0.01 to 6000 seconds
  • S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
  • Stall prevention: Accel / decel / running
  • Power loss ride-thru: Auto-restart or inertia ride-thru


Protective Features

  • Torque limit (four quadrant)
  • Electronic motor overload (UL 508C)
  • Over-torque / under-torque detection
  • Phase-to-phase and ground fault short circuit protection
  • Over-current, over-voltage, and overtemperature protection
  • Input / output phase loss protection
  • Optically-isolated controls
  • DC bus charge indicator
  • Motor thermistor input


Inputs and Outputs

  • Analog inputs: 3 (2 programmable), -10 to
    +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
  • Analog outputs: 2 programmable, -10 to
    +10 VDC or 4-20 mA, 9 bit plus sign
  • Digital inputs: 12 (10 programmable), sinking or sourcing
  • Digital outputs: 5 programmable, 3 form A and 2 open collector
  • Pulse train input: 1 programmable, 32 kHz max
  • Pulse train output: 1 programmable, 32 kHz max
  • Fault contact: 1 form C
  • RS-232/422/485: Modbus RTU


Standards & Reliability

  • UL, cUL, and CE listed
  • MTBF: Exceeds 28 years
 Design Features
  • LCD keypad display: 5 lines x 16 characters, backlit, 7 languages, copy function
  • Simple programming: Quick start and modified parameter groups
  • Microprocessor logic: 32-bit
  • Memory type: Flash memory for easy updates, custom software applications, and non-volatile program retention
  • Control logic: 24 VDC (sinking or sourcing)
  • Terminal strip: Quick disconnect
  • Front cover: Split for easy wiring
  • Heat sink fan: Plug-in with on-off control
  • Motor auto-tuning: Static and rotational
  • Speed search: Bi-directional into rotating motor
  • Process control: PID, reference with PID trim
  • Motor parameters: 2 sets
  • Stopping methods: Ramp stop, coast stop, fast stop, or high-slip braking
  • DC injection braking: Adjustable level and time
  • Speed reference presets: 17 available
  • Timer function: Programmable on / off delay
  • Digital M.O.P.: Up / down / hold / reset reference
  • Bias and gain: All analog and pulse train I/O
  • Common DC bus capability: All models
  • Dynamic braking transistor: 20 HP and below (240 VAC), 25 HP and below (480 VAC)
  • DC bus choke: 25 HP and above (240 VAC) 30 HP and above (480 VAC)
  • Twelve-pulse capability: 25 HP and above (240 VAC), 30 HP and above (480 VAC)


Service Conditions

  • Enclosure: NEMA 1 or protected chassis
  • Ambient service temperatures:
    -10 to 40 0C (104 0F) NEMA 1,
    -10 to 45 0C (113 0F) protected chassis
  • Input frequency: 50 / 60 Hz ± 5%
  • Input voltage: +10% / -15%, 3 phase, 240 or 480 VAC, phase insensitive
  • Humidity: Non-condensing, 95% maximum
  • Altitude: 3300 feet (1000 meters) w/o derate
  • Vibration: 1G (10 to 20 Hz), 0.6G or less (20 to 55 Hz)


Three-Level 480V Inverter Benefits

  • Lead length: Meets NEMA MG1 Part 31
  • Four times the motor bearing life
  • Quiet operation: 5-10 dB of noise reduction
  • Common mode current: 50% reduction

 

 
Number
Title   
Type 
 
Rev Date Size
EZZ006543 Making Yaskawa Inverter Products Conform with the EMC Directive Technical Manuals 4/4/2002 353 KB
IG.AFD.12 Installation Guide for Profibus DP Option CM061 Installation Guides 7/1/2004 1.1 MB
IG.AFD.13 Installation Guide for DeviceNet Option Card CM059 Installation Guides 7/1/2004 124 KB
IG.AFD.14 Installation Guide for DeviceNet Option Card CM05X Installation Guides 7/1/2004 109 KB
IG.AFD.17 Installation Guide for Modbus Plus Option Card CM071 Installation Guides 7/1/2004 1.8 MB
IG.AFD.20 Installation Guide for LonWorks Option Installation Guides 7/1/2004 94 KB
IG.AFD.25 Installation Guide for EthernetModbusTCP/IP Option CM090 Installation Guides 7/1/2004 121 KB
IG.AFD.50 Installation Guide for Pressure Transducer 3-15 PSI Analog Input Option Card AI-010 Installation Guides 7/1/2004 147 KB
IG.AFD.51 Installation Guide for Analog Ouput Option Card AO-08 AO-12 Installation Guides 7/1/2004 63 KB
IG.AFD.52 Installation Guide for Isolated Analog Output Option Card AO-001 Installation Guides 11/3/2004 89 KB
IG.AFD.53 Installation Guide for Analog Input Option Card AI-14U Installation Guides 7/1/2004 44 KB
IG.AFD.54 Installation Guide for Analog Input Option Card AI-14B Installation Guides 7/1/2004 81 KB
IG.AFD.55 Installation Guide for Isolated Analog Input Option Card AI-040 Installation Guides 7/1/2004 80 KB
IG.AFD.56 Installation Guide for Digital Output Option Card DO-08 Installation Guides 7/1/2004 108 KB
IG.AFD.57 Installation Guide for Digital Output Option Card DO-02C Installation Guides 7/1/2004 113 KB
IG.AFD.58 Installation Guide for Digital Input Option Card DI-08 Installation Guides 7/1/2004 49 KB
IG.AFD.59 Installation Guide for Digital Input Option Card DI-16H2 Installation Guides 7/1/2004 68 KB
IG.AFD.60 Installation Guide for Encoder Feedback Option Card PG-X2 Installation Guides 7/1/2004 114 KB
IG.AFD.61 Installation Guide for Dual Encoder Feedback Option Card PG-W2 Installation Guides 7/1/2004 101 KB
IG.AFD.62 Installation Guide for Analog Input Trim Potentiometer Option Card AI-001 Installation Guides 7/1/2004 31 KB
IG.AFD.63 Installation Guide for 120 VAC Interface Option Card DI-001 Installation Guides 10/3/2004 63 KB
IG.G7.68 Installation Guide for 120VAC Interface Option Card DI-003 Installation Guides 10/3/2004 118 KB
TM.AFD.12 Technical Manual for Profibus-DP Option CM052 Technical Manuals 1/31/2004 2.4 MB
TM.AFD.13 Technical Manual for DeviceNet Option CM059 Technical Manuals 5/1/2004 929 KB
TM.AFD.14 Technical Manual for DeviceNet Option CM05x Technical Manuals 4/1/2004 523 KB
TM.AFD.20 Technical Manual for LonWorks Option Technical Manuals 3/30/2004 479 KB
TM.DW.03 DriveWizard 6.0 Software User Manual Technical Manuals 9/14/2004 1.6 MB
TM.G7.01 G7 DRIVE TECHNICAL MANUAL Technical Manuals 9/1/2004 4.5 MB

 

P7 Drive
5 - 500 Horsepower Industrial Fan and Pump Drive

Specifications and Features for P7 Drive
 

For industrial applications such as centrifugal fans and pumps, the P7 drive is an ideal choice. The drive is provided in Normal Duty ratings with 110% overload capability. V/f control mode, network communication options, and an array of input/output options are available.

The P7 is factory-programmed and ready to run. For operational simplicity and clarity, the LCD operator display has 5 lines x 16 characters. It can be set to any of 7 languages. The keypad is intuitive and includes parameter copying to move a chosen set of parameters from one drive to another. If the application requires programming, the P7 makes it easy. Parameters are grouped in easy to use sets; quick start and advanced. To enhance parameter and data management, DriveWizard software for the PC is available at no charge, for upload/download, trending, and graphing.

This drive is designed for tough industrial environments. It is rugged and reliable, with an MTBF of 28 years. A variety of enclosure options provide the right environmental protection. Providing the right power requirements is also easy with 208/240 and 480 volt ratings, built-in bus choke above 30 HP, common bus capability, and other energy savings options. Other features include motor auto-tuning and configurable options such as circuit breakers and fuses.

The P7 supports the industry's open architecture, open connectivity demands with network communications choices such as DeviceNet, Profibus-DP, and others. Drive coordination with other equipment is simplified with inputs and outputs for 4 to 20 mA, 0-10 V, and an assortment of programmable contacts.

With an optional phase-shifting input transformer, the P7 dual-diode bridge can be operated in 12-pulse rectification mode, reducing input current harmonic distortion factor by over 90%. With lower EMI/RFI emission and lower total harmonic distortion contribution, the P7 meets or exceeds the generally accepted power quality standards. Inherent motor protection features resulting from low noise/low carrier technology provides for longer lead lengths without additional motor protection devices.

The optional P7/Bypass package is a 3-contactor style bypass, allowing motor operation from the drive or across the line. This facilitates drive maintenance while the motor continues to operate.

The P7 has been designed to provide the features and options commonly needed for fan and pump applications.


 

 
Performance Features
  • Ratings:
    5-150 HP, 208 VAC
    5-150 HP, 230 / 240 VAC
    5-500 HP, 480 VAC
    5-250 HP, Bypass
  • Overload capacity: nominal 110% for 60 sec (150% peak)
  • Starting torque: 100% at 3 Hz
  • DC injection braking: at start or stop, adjustable,
  • current-limited (anti-windmilling)
  • Motor preheat function
  • Adjustable accel/decel: 0.1 to 6000 sec.
  • Controlled speed range: 40:1
  • Critical frequency rejection: 3 selectable, adjustable bands
  • Torque-limiting: 30-180%
  • Energy $aving control
  • Torque boost: full range, auto
  • Power loss ride-thru: 2 sec
  • Inertia ride-thru
  • Auto restart after power loss or resettable fault, selectable,
  • programmable
  • Feedback signal loss detection
  • Serial communications loss detection
  • "Up/Down" floating point control capability
  • Stationary motor auto-tuning
  • Sleep function
  • Run-permissive input


Protective Features

  • Current-limited stall prevention
  • Heat sink over-temperature, speed fold-back
  • Bi-directional start into rotating motor
  • Current-limiting DC bus fuse
  • Optically-Isolated controls
  • Short circuit protection: Phase-phase and phase-neutral
  • Ground fault protection
  • Short circuit withstand rating: 65K RMS, 100K RMS with bus reactor
  • Electronic motor overload: UL
  • Current limit
  • Fault display: last 10 faults
  • Fault circuit: OC, OV, OT
  • Over torque and under torque protection
  • Reverse prohibit selectability


Inputs and Outputs

  • Output contacts: One form C and two programmable form A
  • Input terminals: 5 programmable multi-function input terminals
  • Fault input:  Programmable
  • Remote speed command: 0-10 VDC or 4-20 mA, direct or reverse-acting
  • Analog outputs: Programmable, two, 0-10 VDC
Design Features
  • LCD keypad display, 5 lines x 16 characters, backlit, 7 languages,
  • copy function
  • Multi-step speed settings: 5 available
  • Setpoint (PI) control
  • 32-bit microprocessor logic
  • Nonvolatile memory, program retention
  • Displacement power factor: 0.98
  • Output frequency: 0.1 to 120 Hz
  • Frequency resolution: 0.06 Hz
  • Frequency regulation: 0.1%
  • Control Terminal Board: Quick disconnect
  • Carrier frequency: selectable to 15 kHz
  • 3% DC bus reactor: 30-150 HP, 208 VAC; 30-150 HP, 240 VAC;
  • 40-500 HP, 480 VAC; optional on lower ratings
  • 24 VDC control logic, PNP / NPN selectable
  • Transmitter/Option power supply
  • input/output terminal status
  • Timer function: Elapsed time, Delay on start, Delay on stop
  • RS-422/485 port: Modbus protocol
  • Volts/hertz ratio: Preset and programmable V/Hz patterns
  • Meter Functions: Volt, amp, kilowatt, elapsed run time, speed command
  • NEMA 1 or protected chassis
  • UL, cUL listed and CE marked; IEC 146;
  • MTBF: exceeds 28 years
  • DriveWizard upload/download and monitoring/graphing software


Service Conditions

  • Ambient Temperature:
    -10 °C to 40 °C NEMA 1, 45 °C protected chassis
    (14 °F to 104 °F, 113 °F)
  • Humidity: 95% RH, non-condensing
  • Altitude: 3300 ft; higher by derate
  • Input voltage: +10%/-15%
  • Input frequency: 50/60 Hz ± 5%
  • 3-phase, 3-wire, phase sequence insensitive


Bypass Features

  • Input, output, and bypass contactors
  • Circuit breaker disconnect (MCP)
  • Thermal motor overload relay, class 20
  • 115 VAC control transformer, fused
  • Drive/Bypass selector
  • Hand/Off/Auto selector
  • Normal/Test selector
  • Pilot lights
  • Selectable auto transfer to bypass on drive fault
  • Run mode and Fault contacts
  • Safety circuit interlock
  • Control and safety circuit terminal strip
  • Customer Use, 115 VAC, 100 VA

 

 
Number
Title   
Type 
 
Rev Date Size
EZZ006543 Making Yaskawa Inverter Products Conform with the EMC Directive Technical Manuals 4/4/2002 353 KB
IG.AFD.12 Installation Guide for Profibus DP Option CM061 Installation Guides 7/1/2004 1.1 MB
IG.AFD.14 Installation Guide for DeviceNet Option Card CM05X Installation Guides 7/1/2004 109 KB
IG.AFD.17 Installation Guide for Modbus Plus Option Card CM071 Installation Guides 7/1/2004 1.8 MB
IG.AFD.20 Installation Guide for LonWorks Option Installation Guides 7/1/2004 94 KB
IG.AFD.25 Installation Guide for EthernetModbusTCP/IP Option CM090 Installation Guides 7/1/2004 121 KB
IG.AFD.50 Installation Guide for Pressure Transducer 3-15 PSI Analog Input Option Card AI-010 Installation Guides 7/1/2004 147 KB
IG.AFD.62 Installation Guide for Analog Input Trim Potentiometer Option Card AI-001 Installation Guides 7/1/2004 31 KB
IG.AFD.67 Installation Guide for 120VAC Interface Option Card DI-002 Installation Guides 10/3/2004 60 KB
TM.AFD.12 Technical Manual for Profibus-DP Option CM052 Technical Manuals 1/31/2004 2.4 MB
TM.AFD.14 Technical Manual for DeviceNet Option CM05x Technical Manuals 4/1/2004 523 KB
TM.AFD.20 Technical Manual for LonWorks Option Technical Manuals 3/30/2004 479 KB
TM.DW.03 DriveWizard 6.0 Software User Manual Technical Manuals 9/14/2004 1.6 MB
TM.P7.01 P7 DRIVE USER MANUAL Technical Manuals 11/1/2004 4.3 MB
TM.P7.02 P7 Drive Programming Manual Technical Manuals 11/1/2004 2.5 MB
TM.P7.21 Technical Manual for P7 Apogee FLN Technical Manuals 9/13/2004 3.0 MB
TM.P7.22 Technical Manual for P7 Metasys N2 Technical Manuals 9/13/2004 2.8 MB
TM.P7B.01 P7B DRIVE BYPASS TECHNICAL MANUAL Technical Manuals 10/1/2003 2.9 MB

 

V7 Drive
1/8 - 10 Horsepower General Purpose Vector Drive

Specifications and Features for V7 Drive
 

The V7 Drive is a high performance AC drive for induction motors, providing low motor noise and high starting torque. The V7 provides two control methods; V/f and open loop vector control for precision speed regulation applications. In addition to good speed regulation, open loop vector control also provides higher torque at lower speeds. The V7 is intended for constant torque applications, with current overload rating of 150% for 60 seconds.

The V7 is fully featured and compact. The digital operator provides 4-digit LED status display with a built-in analog speed potentiometer, as well as digital programming of almost 200 parameters. The digital pulse train input provides a precise frequency input, and is the perfect solution for speed / follower applications. The seven standard multi-function inputs can be programmed to allow for 17 preset speeds. The V7 also has an analog input, a multi-function output, two multi-function open collector outputs, and an analog output as standard.

The V7 is ideally suited for applications such as conveyors, grinders, centrifuges, pumps, fans, blowers, machine tools, packaging, food processing, and commercial laundry.

One of the outstanding options for the V7 is DriveWizard. This software enables upload, download, and monitoring of parameters. Another software, CASE, can add functionality to the drive by reconfiguring drive defaults, establishing presets for OEM equipment, and by eliminating peripheral controls and PLCs.

A RS-485 Modbus RTU communication port is standard, allowing 32 nodes on a single network. Plug-in interface option boards enable the drive to communicate with all the major networks, such as DeviceNet, Profibus-DP, and others. The option board installs directly on the drive control board via simple snap-in connectors.

A version of this drive called V7N is available with DeviceNet embedded in the drive control board, reducing cost and installation time.

Another version of this drive called V74X is available with integral NEMA 4X/12 enclosure for dusty and wet environments.

The V7 is provided in a NEMA 1 enclosure from 1/8 to 10 HP at 230 VAC and 1/2 to 10 HP at 460 VAC. (This V7 was previously named GPD 315/V7)

 

 
Performance Features
  • Ratings:
    1/8 to 10 HP at 230 VAC, 1/2 to 10 HP at 460 VAC
  • Constant torque overload rating:
    150% for 1 min., 200% for 30 Sec. (250% peak)
  • DC injection braking, ramp to stop
  • Electronic reversing
  • Adjustable accel/decel: 0.01 to 6000 seconds
  • Controlled speed range: (1)40:1, (2)100:1
  • Speed Regulation (1) ± 0.5 to 1% with slip compensation (2)± 0.2%
  • Drive efficiency: 95%
  • Displacement power factor: 0.98
  • Output frequency: .1 to 400 Hz
  • Frequency resolution: 0.01 Hz with digital reference, 0.06 / 60 Hz with analog reference
  • Frequency accuracy: 0.01% with digital command, 0.5% with analog command
  • Volts / hertz ratio: infinitely adjustable pattern
  • Open loop vector control
  • DC Injection braking: adjustable amplitude, duration, current limited
  • Torque boost: full range, auto
  • Power loss ride-thru: 0.5 sec.
  • Speed search
  • Auto restart
  • 3 Critical frequency rejection settings
  • Slip Compensation
  • Energy Savings Function
  • PID with loss of feedback function


Protective Features

  • Current limit, stall prevention during accel, decel, and run
  • Motor and drive overload
  • Over voltage
  • Instantaneous over current
  • Short circuit
  • Under voltage
  • Heatsink overheat
  • Ground fault protection
  • Over/under torque



Control Methods:
(1) V/Hz Mode
(2) Open Loop Vector Mode

 Design Features
  • 16-bit microprocessor logic
  • Digital keypad operator with analog speed pot
  • LED status display
  • Copy Keypad Function
  • Remote Mount Keypad Capability
  • RJ45 Style Digital Operator Connector
  • 7 multi-function digital inputs
  • Programmable form C output contact for customer use:
    1A at 250 VAC or 30 VDC
  • 24 VDC control logic compatible with sourcing or sinking outputs (PNP or NPN)
  • Carrier frequency: 10 kHz maximum
  • 16 multi-speed settings plus jog speed
  • Remote speed reference: 0-10 VDC (20 kohms) or 4-20 mA (250 ohms)
  • Signal follower: bias and gain
  • 2 programmable open collector outputs
  • Analog monitor output:
    0-10 VDC proportional to output frequency or output current
  • Approximately 200 parameters
  • Digital pulse train input (30 kHz max.)
  • Cooling fan controlled by drive run/stop
  • RS-485/RS-422 serial communication port (up to 32 nodes)
  • Baud rate of 19.2 kbps
  • UL and cUL listed; CE approved
  • UL recognized electronic overload
  • MTBF: exceeds 28 years
  • Dynamic Braking Transistor
  • NEMA 1 enclosure


Service Conditions

  • Ambient service temperature:
    -10° to 40°C (14° to 105°F)
  • Ambient storage temperature:
    -20° to 60°C (-4° to 140°F)
  • Humidity: to 95% non-condensing
  • Altitude: to 3280 ft; higher by derating
  • Service factor: 1.0
  • Input voltage: -15% to +10%
    200 to 230 VAC,
    380 to 460 VAC
  • Input frequency:+/-5%; 50/60 Hz
  • Phase sequence insensitive

 

 
Number
Title   
Type 
 
Rev Date Size
2Y25-0514 Serial Communication Option Kit GPD315 V7 Installation Guides 8/23/2001 1.8 MB
2Y25-0516 Remote Digital Operator Kit, DS081 & DS083 for V7 Drive Installation Guides 8/24/2001 293 KB
2Y25-0518 Bi-Polar Analog Input Card, DS080 for V7 Drive Installation Guides 8/23/2001 95 KB
2Y25-0519 Auxiliary Analog Input Connector Assy. DS082 for V7 GPD315 Installation Guides 7/16/2003 139 KB
2Y25-0520 Remote Digital Operator Kit, DS084 & DS086 Nema 1 for V7 GPD315 Installation Guides 8/28/2001 360 KB
EZZ006543 Making Yaskawa Inverter Products Conform with the EMC Directive Technical Manuals 4/4/2002 353 KB
IG.V7.01 Installation Guide for V7 and V74X Installation Guides 8/1/2003 737 KB
IG.V7.12 Installation Guide for V7 Profibus DP Option CM067 Installation Guides 7/1/2004 137 KB
IG.V7.13 Installation Guide for V7 DeviceNet Option CM052 Installation Guides 7/1/2004 132 KB
IG.V7.69 Installation Guide for 120VAC Interface Option Card DI-004, DI-005 Installation Guides 7/1/2004 235 KB
TM.DW.03 DriveWizard 6.0 Software User Manual Technical Manuals 9/14/2004 1.6 MB
TM.V7.01 V7 and V74X DRIVES TECHNICAL MANUAL Technical Manuals 8/1/2003 2.5 MB
TM.V7.12 Technical Manual for V7 Profibus-Dp Option CM067 Technical Manuals 6/20/2002 3.2 MB
TM.V7SW.025 V7 High Carrier Frequency 14.5kHz Software Technical Manual Technical Manuals 7/1/2004 14 KB
TM.V7SW.026H V7 High Frequency 800Hz Software Technical Manual Version for 230V/460V class 5.5/7.5kW Technical Manuals 7/1/2004 70 KB
TM.V7SW.026L V7 High Frequency 800Hz Software Technical Manual version for 230V/460V class 4.0kW or less Technical Manuals 7/1/2004 70 KB
TM.V7SW.028 V7 PID for Trim Control Software Technical Manual Technical Manuals 7/1/2004 88 KB
TM.V7SW.029 V7 Traverse Software Technical Manual Technical Manuals 7/1/2004 59 KB
TM.V7SW.030 V7 Decel Positioning Software Technical Manual Technical Manuals 12/2/2004 46 KB
TM.V7SW.031 V7 for Extended S-Curve Software Technical Manual Technical Manuals 7/1/2004 8 KB
TM.V7SW.032H V7 Textile Fiber Winder Software Technical Manual Technical Manuals 7/1/2004 38 KB
TM.V7SW.032L V7 Textile Fiber Winder Software Technical Manual Technical Manuals 7/1/2004 34 KB
TM.V7SW.034 V7 Enhanced Memobus Software Technical Manual Technical Manuals 7/1/2004 18 KB
TM.V7SW.037 V7 External Terminal DC Injection Software Technical Manual Technical Manuals 7/1/2004 25 KB
TM.V7SW.039 V7 Enhanced PID Software Technical Manual Technical Manuals 7/1/2004 147 KB
TM.V7SW.041 V7 Limit Switch Software Technical Manual Technical Manuals 7/1/2004 47 KB
TM.V7SW.052 V7 Software DC Injection and Trim Control Technical Manual Technical Manuals 7/1/2004 72 KB
TM.V7SW.054 V7 Software for 2 motor selection Technical Manual Technical Manuals 7/1/2004 31 KB
TM.V7SW.068 V7 Software for PID Trim Control Technical Manual Technical Manuals 7/1/2004 65 KB
TM.V7SW.070 Enhanced 18.8A Current Rating Model 47P5 Only Technical Manuals 7/1/2004 17 KB
TM4320 Technical Manual for V7 with DeviceNet Option Technical Manuals 11/1/2001 1.9 MB
TM4323 Technical Manual for V7 with Profibus II Option Technical Manuals 7/12/2001 581 KB
TM4325 Technical Manual for V7 with Modbus RTU Option Technical Manuals 7/12/2001 701 KB
YEA-TOA-S606-11A Instruction Manual VS-606V7 Series Technical Manuals 12/1/1999 1.8 MB
YEA-TOS-S606.11.A Serie VS mini V7 Manual de instrucciones Technical Manuals 12/1/1999 4.2 MB
YEG-TOG-S606-11B Instruction Manual for the Varispeed 606V7 Drive. German Language Technical Manuals 9/1/2001 1.3 MB
YEG-TSF-S606-11B V7 French Language, short version Technical Manuals 6/1/2001 1.2 MB

 

V7N Drive
1/8 - 10 Horsepower General Purpose Vector Drive with Embedded DeviceNet

Specifications and Features for V7N Drive
 

The V7N is a general purpose, AC motor drive for facilities using DeviceNet communications. This drive provides amazing performance in a small package, and at significant cost benefit compared to drives that use optional plug-in interface cards. The V7N was created by embedding DeviceNet into the control card of the highly successful V7 drive.

The V7N provides low motor noise and high starting torque. Two control methods are provided – V/f and Open Loop Vector control for precise speed regulation. Open Loop Vector control also provides higher torque at low speed. The V7N is designed for constant torque applications, with current overload rating of 150% for 60 seconds.

The digital operator provides a 4-digit LED status display with a built-in analog speed potentiometer, as well as digital programming of almost 200 parameters. The V7N includes 3 multi-function DeviceNet inputs, four multi-function digital inputs, an analog input, a multi-function DeviceNet output and two multi-function open collector outputs.
The embedded DeviceNet allows 64 network nodes. It includes programmable MAC ID and baud rate. The V7N supports drive type profiles with flash capability for easy software upgrades. Network status LEDs are visible through the cover and a plugable connector simplifies wiring.

One of the outstanding options for the V7N is DriveWizard. This software tool is used for online and offline configuration, monitoring, and archiving to a personal data assistant or PC. CASE is another software that can add functionality to the drive by reconfiguring drive defaults, establishing presets for OEM equipment, and by eliminating peripheral controls and PLCs.

This V7N with DeviceNet is provided in a NEMA 1 enclosure from 1/8 to 10 HP at 230 VAC and 1/2 to 10 HP at 460 VAC.
The V7N is ideally suited for applications such as conveyors, grinders, centrifuges, pumps, fans, machine tools, packaging, food processing, automotive assembly, and textiles.

V7N is the perfect choice wherever high performance, small size, and DeviceNet Communication are required.

(The V7 drives family includes the basic V7 and the V74X. Both offer various network communications via optional plug-in interface cards.)

 

 
Performance Features
  • Ratings: 1/8 to 10 HP at 230 VAC,
    1/2 to 10 HP at 460 VAC
  • Constant torque overload rating: 150% for 1 min., 200% for 30 Sec. (250% peak)
  • DC injection braking, ramp to stop
  • Electronic reversing
  • Adjustable accel/decel: 0.01 to 6000 seconds
  • Controlled speed range:
    40:1(1)
    100:1(2)
  • Speed regulation:
    ± 0.5 to 1% with slip compensation(1)
    ± 0.2%(2)
  • Drive efficiency: 95%
  • Displacement power factor: 0.98
  • Output frequency: 0.1 to 400 Hz
  • Frequency resolution:
    0.01 Hz with digital reference
    0.06 / 60 Hz with analog reference
  • Frequency accuracy:
    0.01% with digital command
    0.5% with analog command
  • Volts / hertz ratio: infinitely adjustable pattern
  • Open loop vector control
  • DC Injection braking: adjustable amplitude, duration, current limited
  • Torque boost: full range, auto
  • Power loss ride-thru: 0.5 sec.
  • Speed search
  • Auto restart
  • 3 Critical frequency rejection settings
  • Slip Compensation
  • Energy Savings Function
  • PID with loss of feedback function


Protective Features

  • Current limit, stall prevention during accel, decel, and run
  • Motor and drive overload
  • Over voltage
  • Instantaneous over current
  • Short circuit
  • Under voltage
  • Heatsink overheat
  • Ground fault protection
  • Over/under torque




(1) V/Hz Mode
(2) Open Loop Vector Mode

Design Features
  • 16-bit microprocessor logic
  • Digital keypad operator with analog speed pot
  • LED status display
  • Copy Keypad Function
  • Remote Mount Keypad Capability
  • RJ-45 Style Digital Operator Connector
  • 4 multi-function digital inputs
  • 3 multi-function DeviceNet inputs
  • Programmable DeviceNet output
  • 24 VDC control logic compatible with sourcing or sinking outputs (PNP or NPN)
  • Carrier frequency: 10 kHz maximum
  • 16 multi-speed settings plus jog speed
  • Remote speed reference:
    0-10 VDC (20 kohms) or 4-20 mA (250 ohms)
  • Signal follower: bias and gain
  • 2 programmable open collector outputs
  • Approximately 200 parameters
  • Digital pulse train input (30 kHz max.)
  • Cooling fan controlled by drive run/stop
  • UL and cUL listed; CE approved
  • UL recognized electronic overload
  • MTBF: exceeds 28 years
  • Dynamic Braking Transistor
  • NEMA 1 enclosure


Service Conditions

  • Ambient service temperature:
    -10° to 40°C (14° to 105°F)
  • Ambient storage temperature:
    -20° to 60°C (-4° to 140°F)
  • Humidity: to 95% non-condensing
  • Altitude: to 3280 ft; higher by derating
  • Service factor: 1.0
  • Input voltage: -15% to +10%
    200 to 230 VAC,
    380 to 460 VAC
  • Input frequency: +/-5%; 50/60 Hz
  • Phase sequence insensitive


DeviceNet Features

  • Embedded DeviceNet
  • Quick disconnect style plug
  • Baud rate: 125/250/500 KBps
  • Baud rate setting: Programmable or DIP switches
  • Device Profile: AC Drive device type 02
  • Message types:
    - Explicit Message I/O polled message
    - Group 2 only server
  • MAC ID setting: programmable or DIP switches

 

 
Number
Title   
Type 
 
Rev Date Size
EZZ006543 Making Yaskawa Inverter Products Conform with the EMC Directive Technical Manuals 4/4/2002 353 KB
IG.V7N.01 Installation Guide for V7N Drive with embedded DeviceNet Installation Guides 6/15/2002 670 KB
TM.DW.03 DriveWizard 6.0 Software User Manual Technical Manuals 9/14/2004 1.6 MB
TM.V7N.01 V7N DRIVE TECHNICAL MANUAL Technical Manuals 6/15/2002 1.9 MB

 

V74X Drive
1/8 - 15 Horsepower General Purpose Vector Drive NEMA Type 4X/12

Specifications and Features for V74X Drive
 

The V7 Drive is a high performance AC drive for induction motors, providing low motor noise and high starting torque. The V7 provides two control methods; V/f and open loop vector control for precision speed regulation applications. In addition to good speed regulation, open loop vector control also provides higher torque at lower speeds. The V7 is intended for constant torque applications, with current overload rating of 150% for 60 seconds.

The V7 is fully featured and compact. The digital operator provides 4-digit LED status display with a built-in analog speed potentiometer, as well as digital programming of almost 200 parameters. The digital pulse train input provides a precise frequency input, and is the perfect solution for speed / follower applications. The seven standard multifunction inputs can be programmed to allow for 17 preset speeds. The V7 also has an analog input, a multifunction output, two multifunction open collector outputs, and an analog output as standard.

The V7 is ideally suited for applications such as conveyors, grinders, centrifuges, pumps, fans, blowers, machine tools, packaging, food processing, and commercial laundry.

One of the outstanding options for the V7 is DriveWizard. This software enables upload, download, and monitoring of parameters. Another software, CASE, can add functionality to the drive by reconfiguring drive defaults, establishing presets for OEM equipment, and by eliminating peripheral controls and PLCs.

A RS485 Modbus RTU communication port is standard, allowing 32 nodes on a single network. Plug-in interface option boards enable the drive to communicate with all the major networks, such as DeviceNet, Profibus, and others. The option board installs directly on the drive control board via simple snap-in connectors.

A version of this drive called V7N is available with DeviceNet embedded in the drive control board, reducing cost and installation time.

Another version of this drive called V74X is available with integral NEMA 4X/12 enclosure for dusty and wet environments.

The V7 is provided in a NEMA 1 enclosure from 1/8 to 10 HP at 230 VAC and 1/2 to 10 HP at 460 VAC. (This V7 was previously named GPD 315/V7)

 

 
Performance Features
  • Ratings:
    1/8 to 10 HP at 230 VAC, 1/2 to 10 HP at 460 VAC
  • Constant torque overload rating:
    150% for 1 min., 200% for 30 Sec. (250% peak)
  • DC injection braking, ramp to stop
  • Electronic reversing
  • Adjustable accel/decel: 0.01 to 6000 seconds
  • Controlled speed range: (1)40:1, (2)100:1
  • Speed Regulation (1) ± 0.5 to 1% with slip compensation (2)± 0.2%
  • Drive efficiency: 95%
  • Displacement power factor: 0.98
  • Output frequency: .1 to 400 Hz
  • Frequency resolution: 0.01 Hz with digital reference,
    0.06 / 60 Hz with analog reference
  • Frequency accuracy: 0.01% with digital command, 0.5% with analog command
  • Volts / hertz ratio: infinitely adjustable pattern
  • Open loop vector control
  • DC Injection braking: adjustable amplitude, duration, current limited
  • Torque boost: full range, auto
  • Power loss ride-thru: 0.5 sec.
  • Speed search
  • Auto restart
  • 3 Critical frequency rejection settings
  • Slip Compensation
  • Energy Savings Function
  • PID with loss of feedback function


Protective Features

  • Current limit, stall prevention during accel, decel, and run
  • Motor and drive overload
  • Over voltage
  • Instantaneous over current
  • Short circuit
  • Under voltage
  • Heatsink overheat
  • Ground fault protection
  • Over/under torque




Control Methods:
(1) V/Hz Mode
(2) Open Loop Vector Mode

 Design Features
  • 16-bit microprocessor logic
  • Digital keypad operator with analog speed pot
  • LED status display
  • Copy Keypad Function
  • Remote Mount Keypad Capability
  • RJ-45 Style Digital Operator Connector
  • 7 multifunction digital inputs
  • Programmable form C output contact for customer use:
    1A at 250 VAC or 30 VDC
  • 24 VDC control logic compatible with sourcing or sinking outputs (PNP or NPN)
  • Carrier frequency: 10 kHz maximum
  • 16 multi-speed settings plus jog speed
  • Remote speed reference: 0-10 VDC (20 kohms) or 4-20 mA (250 ohms)
  • Signal follower: bias and gain
  • 2 programmable open collector outputs
  • Analog monitor output:
    0-10 VDC proportional to output frequency or output current
  • Approximately 200 parameters
  • Digital pulse train input (30 kHz max.)
  • Cooling fan controlled by drive run/stop
  • RS485/RS422 serial communication port (up to 32 nodes)
  • Baud rate of 19.2 kbps
  • UL and cUL listed; CE approved
  • UL recognized electronic overload
  • MTBF: exceeds 28 years
  • Dynamic Braking Transistor
  • NEMA 1 enclosure


Service Conditions

  • Ambient service temperature:
    -10° to 40°C (14° to 105°F)
  • Ambient storage temperature:
    -20° to 60°C (-4° to 140°F)
  • Humidity: to 95% non-condensing
  • Altitude: to 3280 ft; higher by derating
  • Service factor: 1.0
  • Input voltage: -15% to +10%
    200 to 230 VAC,
    380 to 460 VAC
  • Input frequency:+/-5%; 50/60 Hz
  • Phase sequence insensitive

 

 
Number
Title   
Type 
 
Rev Date Size
EZZ006543 Making Yaskawa Inverter Products Conform with the EMC Directive Technical Manuals 4/4/2002 353 KB
IG.V7.01 Installation Guide for V7 and V74X Installation Guides 8/1/2003 737 KB
IG.V7.12 Installation Guide for V7 Profibus DP Option CM067 Installation Guides 7/1/2004 137 KB
IG.V7.69 Installation Guide for 120VAC Interface Option Card DI-004, DI-005 Installation Guides 7/1/2004 235 KB
IG.V74X.01 Installation Guide for Extension Ring Kit Option for V74X Drive Installation Guides 7/1/2004 199 KB
TM.DW.03 DriveWizard 6.0 Software User Manual Technical Manuals 9/14/2004 1.6 MB
TM.V7.01 V7 and V74X DRIVES TECHNICAL MANUAL Technical Manuals 8/1/2003 2.5 MB
TM.V7.12 Technical Manual for V7 Profibus-Dp Option CM067 Technical Manuals 6/20/2002 3.2 MB
TM4320 Technical Manual for V7 with DeviceNet Option Technical Manuals 11/1/2001 1.9 MB
TM4323 Technical Manual for V7 with Profibus II Option Technical Manuals 7/12/2001 581 KB

 

J7 Drive
1/8 - 5 Horsepower General Purpose AC Drive

Specifications and Features for J7 Drive
 

The J7 drive is a general purpose drive for use with squirrel cage induction motors. This PWM design provides low motor noise and high starting torque. The current overload rating is 150% for 60 seconds.  V/f control makes this drive suitable for most general applications.

The J7 is feature-packed, low cost and compact. The digital operator includes a 3-digit LED status display and an analog speed potentiometer. Digital programming covers 79 parameters suitable for many applications. The four standard multifunction inputs can be programmed to allow for 9 preset speeds. The J7 also has an analog input, a multifunction output, and an analog output as standard.

DriveWizard is one of the outstanding options for the drive. This software enables upload, download, and monitoring of drive parameters.
An optional RS-485 Modbus RTU serial communication port is available with up to 32 nodes on a single network.

The J7 is ideal for applications such as conveyors, grinders, centrifuges, pumps, fans and blowers used in material handling, packaging, food processing, and commercial laundry.

The J7 is available in protected chassis models from 1/8 to 5 HP at 230 VAC and 1/2 to 5 HP at 460 VAC. (This J7 was previously named GPD 305/J7)

J7 is an ideal choice whenever excellent performance, low cost, and small size are required.

 

 
Performance Features
  • Ratings:
    1/8 to 5 HP at 230 VAC,
    1/2 to 5 HP at 460 VAC
  • Constant torque overload rating: 
    150% for 1 min. (250% peak)
  • DC injection braking, ramp to stop
  • Electronic reversing
  • Adjustable accel/decel: 
    0.1 to 999 seconds
  • Controlled speed range: 40:1
  • Speed Regulation: 
    ± 0.5 to 1% with slip compensation
  • Drive efficiency: 95%
  • Displacement power factor: 0.98



Performance Features

  • Output frequency: 1.5 to 400 Hz
  • Frequency resolution:
    0.01 Hz with digital reference
    0.06 / 60 Hz with analog reference
  • Frequency accuracy:
    0.01% with digital command
    0.5% with analog command
  • Volts / hertz ratio:  infinitely adjustable pattern
  • DC Injection braking:  adjustable amplitude, duration, current limited
  • Torque boost: full range, auto
  • Power loss ride-thru: 0.5 sec.
  • Speed search
  • Auto restart
  • 2 Critical frequency rejection settings
  • Slip compensation


Protective Features

  • Current limit, stall prevention during accel, decel, and run
  • Motor and drive overload
  • Over voltage
  • Instantaneous over current
  • Short circuit
  • Under voltage
  • Heatsink overheat
  • Ground fault protection
  • Over torque
Design Features
  • 16-bit microprocessor logic
  • Digital keypad operator with analog speed pot
  • LED status display
  • Copy Keypad Function
  • Remote Mount Keypad Capability
  • 4 multifunction digital inputs
  • Programmable form C output contact for customer use: 
    1A at 250 VAC or 30 VDC
  • 24 VDC control logic compatible with sourcing or sinking outputs (PNP or NPN)
  • Carrier frequency: 10 kHz maximum
  • 8 multi-speed settings plus jog speed
  • Remote speed reference:  
    0-10 VDC (20 kohms) or 
    4-20 mA (250 ohms)


Design Features

  • Signal follower: bias and gain
  • Analog monitor output: 
    0-10 VDC proportional to output frequency or output current
  • 79 parameters
  • Cooling fan controlled by drive run/stop
  • UL and cUL listed; CE approved
  • UL recognized electronic overload
  • MTBF: exceeds 28 years
  • Protected chassis
     

Service Conditions

  • Ambient service temperature:
    -10 to 50 °C (14 to 122 °F)
  • Ambient storage temperature:
    -20 to 60 °C (-4 to 140 °F)
  • Humidity: to 95% non-condensing
  • Altitude: to 3280 ft; higher by derating
  • Service factor: 1.0
  • Input voltage: -15% to +10%
    200 to 230 VAC, 380 to 460 VAC
  • Input frequency: +/-5%; 50/60 Hz
  • Phase sequence insensitive

 

 
Number
Title   
Type 
 
Rev Date Size
2Y25-0515 Remote Digital Operator Kit, DS031 & DS033 Nema 4/12 for J7 drive Installation Guides 5/9/2000 292 KB
TM.DW.03 DriveWizard 6.0 Software User Manual Technical Manuals 9/14/2004 1.6 MB
TM.J7.01 J7 DRIVE TECHNICAL MANUAL Technical Manuals 6/1/2003 3.3 MB
YEA-TOA-S606-12 Instruction Manual J7 drive for UL Spec Inverters. English Technical Manuals 12/1/1999 2.7 MB
YEA-TOS-S606.12 Serie J7 Manual de instruccione.s Spanish Technical Manuals 12/1/1999 2.8 MB
YEG-TSF-S606-12B J7 Drive French Instruction Manual Technical Manuals 6/27/2001 1.5 MB

 

G5HHP Drive
350 - 1800 Horsepower High Horsepower AC Drive

Specifications and Features for G5HHP Drive
 

A flexible modular design allows Yaskawa to use common components in the full featured G5HHP adjustable speed drives with ratings from 400 to 1,600 amps, 460/600 VAC, 350 to 1,800 HP. Variable torque and constant torque ratings are available.

Process control panels or circuit breakers can easily be incorporated into the drive package. The desired power level is achieved simply by adding rectifier sections and 400 amp inverter modules in parallel. Slide-rail construction techniques permit easy access for maintenance, removal or replacement of modules.

While a fully-regenerative front end is available, the drives feature a standard non-regenerative front end and can easily support a 12-pulse configuration for reduced harmonics.

The drive provides increased versatility in large horsepower applications such as pumps and fans, chillers, pulp and paper manufacturing and mining industry conveyors, rock crushers and extruders.

The drive utilizes 32-bit microprocessing to deliver three levels of drive performance in a single package. It combines breakthrough processing power with the best of PWM and vector control to offer volts/hertz, open loop or closed loop flux vector performance.

Speed regulation of 0.01% of motor rated speed is available in closed vector applications, with a controlled range of 1000:1 down to zero speed. Precise controlled speed ranges of 50:1 in open loop vector mode and 40:1 in volts/hertz modes are also available.


 

Performance Features
  • Ratings: 
    350 to 1300 HP at 460 VAC, Constant Torque
    350 to 1500 HP at 460 VAC, Variable Torque
    450 to 1600 HP at 600 VAC, Constant Torque
    450 to 1800 HP at 600 VAC, Variable Torque
  • Overload capacity: 
    150% for 60 sec, Constant Torque
    120% for 60 sec, Variable Torque
  • Starting torque: 150%
  • Electronic reversing
  • Adjustable accel/decel: 0.1 to 6000 sec
  • Controlled speed range:
    (1) 40:1,
    (2) 100:1,
    (3) 1000:1
  • Drive efficiency: 96 to 98%
  • Displacement power factor: 0.98
  • Output frequency: 0.1 to 150 Hz
  • Jog forward and reverse
  • Power loss ride-thru: 2 sec
  • Inertia ride-thru
  • Selectable auto restart after momentary power loss
  • Programmable auto restart (0 to 10 attempts) on resettable fault
  • Critical frequency rejection:  3 selectable, adjustable bands


Protective Features

  • DC bus CHARGE indicator
  • Optically-Isolated controls
  • Phase-to-phase / phase-to-neutral short circuit protection
  • Ground fault protection
  • Electronic motor overload (UL)/(NEC)
  • Current and torque limit
  • Overtorque/undertorque detection
  • Fault circuit: overcurrent, overvoltage, and overtemperature
  • Input/output phase loss


Volts/Hertz Features

  • DC injection braking: ramp or coast to stop, adj. current limited to 60% motor rating
  • Frequency resolution:
    0.01 Hz with digital reference
    0.06 Hz with analog reference
  • Frequency regulation (15° to 35°C):
    0.01% with digital reference
    0.1% with analog reference
  • Torque boost: full range, auto
  • Current limited stall prevention during accel, decel and run
  • Synchronized start into rotating motor via speed search
  • V/Hz ratio: 15 preset; 1 infinitely adjustable
  • Slip compensation


Control Methods:
(1) Volts/Hertz; (2) Open Loop vector; (3) Flux vector (closed loop)

 Design Features
  • 32-bit logic, including 16-bit DSP
  • Carrier frequency to 2 kHz
  • Alpha-numeric operator, removable, 2 lines x 16 character
  • 24 VDC control logic
  • Programmable outputs. One form A and two open collector
  • Timer function
  • RS-232 communication port
  • 9 Multi-speed settings
  • Remote speed reference:
    -10 to +10 VDC (20K ohms) or 4 to 20 mA (250 ohms)
  • Setpoint (PID) control
  • Signal follower: bias and gain
  • Analog monitor output: -10 to +10 VDC proportional to output parameters
  • DC bus reactor
  • Dual motor parameter sets
  • Auto-tune to motor characteristics
  • Common bus capability
  • Programmable external faults : Qty 6
  • Run and fault contacts (1A)
  • Up / down / hold reference
  • NEMA 1 enclosed
  • MTBF: exceeds 28 years
  • Output reactor (parallel output sections only)


Vector Control Features

  • Speed resolution: 
    0.01% with digital reference 
    0.1% with analog reference
  • Speed regulation: (15° to 35°C)
    ( 2) 0.1% with digital reference
    (3) 0.01% with digital reference
    (3) 0.1% analog reference
    (3) Encoder response: 300 kHz
    (3) Optional PG card, A/B/Z ph line driver, +5 or +12v
    (3) Stall torque: to 150% at zero speed for 1 minute, 100% continuous


Service Conditions

  • Ambient service temperature:  -10°C to 40°C (104°F) NEMA 1
  • Humidity: to 95% non-condensing
  • Altitude: to 3300 ft; higher by derating
  • Input voltage: +10%/-15%, 380 to 460 VAC, 500 to 600 VAC
  • 3-phase sequence insensitive
  • UL listed; cUL listed; IEC: 146A


Control Methods:
(1) Volts/Hertz; (2) Open Loop vector; (3) Flux vector (closed loop)

 
Number
Title   
Type 
 
Rev Date Size
IG.AFD.17 Installation Guide for Modbus Plus Option Card CM071 Installation Guides 7/1/2004 1.8 MB
IG.AFD.51 Installation Guide for Analog Ouput Option Card AO-08 AO-12 Installation Guides 7/1/2004 63 KB
IG.AFD.53 Installation Guide for Analog Input Option Card AI-14U Installation Guides 7/1/2004 44 KB
IG.AFD.54 Installation Guide for Analog Input Option Card AI-14B Installation Guides 7/1/2004 81 KB
IG.AFD.56 Installation Guide for Digital Output Option Card DO-08 Installation Guides 7/1/2004 108 KB
IG.AFD.57 Installation Guide for Digital Output Option Card DO-02C Installation Guides 7/1/2004 113 KB
IG.AFD.58 Installation Guide for Digital Input Option Card DI-08 Installation Guides 7/1/2004 49 KB
IG.AFD.59 Installation Guide for Digital Input Option Card DI-16H2 Installation Guides 7/1/2004 68 KB
IG.AFD.60 Installation Guide for Encoder Feedback Option Card PG-X2 Installation Guides 7/1/2004 114 KB
TM.G5HHP.01 G5HHP Drive Technical Manual Technical Manuals 4/15/2002 5.0 MB
TOE-S616-10.21 Varispeed-616G5 HHP User's Manual Technical Manuals 11/1/2000 15.3 MB

 

G5 Drive 600 Volt
2 - 200 Horsepower General Purpose Vector Drive

Specifications and Features for G5 Drive 600 Volt
 

The GPD 515/G5. This AC drive incorporates a 32-bit RISC microcontroller to handle all logic functions as well as the complex, sine-coded PWM generating algorithms that control IGBT switching. Using flash ROM and Application Specific Integrated Circuits, the drive provides the benefits of all-digital control, serial communications, and adjustments that don't age, drift or vary with line voltage. The drive is such an excellent choice because it incorporates three control modes in one product; traditional V/Hz, open loop vector, and closed loop flux vector control performance.

The GPD 515/G5 is factory programmed and ready to run. When operated from a remote process control, no operator actions are required. For manual operation, set the frequency reference, set for local or remote control and press the RUN key.

As a solutions provider, Yaskawa supports and encourages the industry's open architecture, open connectivity demands. GPD drive products can communicate via all the popular communication protocols such as DeviceNet, Modbus, Profibus and others.

The GPD 515/G5 is equipped with a serial port utilizing standard Modbus protocol. All drive interfaces allow for all parameters, diagnostics, and operational commands. Optional interface boards provide a wide range of control, monitoring, and diagnostic communication capabilities for integration from plant floor to supervisory level systems.

One of the outstanding options for the G5 is DriveWizard, software that enables upload, download, and monitoring of parameters.

Another software, CASE, can add functionality to the drive by reconfiguring drive defaults, establishing presets for OEM equiopment, and by eliminating peripheral controls and PLCs. CASE application-specific software can be easily flashed to the on-board ROM.

The GPD 515/G5 adaptability and flexibility provide a unique assortment of benefits for every application. It is ideal for thousands of applications, ranging from simple to complex, low to high precision, single drive or coordinated systems. In addition, virtually every application enjoys the benefits of high efficiency and power factor, high reliability, simple human interface, self-protection and no maintenance.


 

Performance Features
  • Ratings: 2 to 200 HP at 600 VAC 
  • Overload capacity: 150% for 60 sec (200% peak)
  • Starting torque: 150%
  • Electronic reversing
  • Adjustable accel/decel: 0.1 to 6000 sec
  • Controlled speed range: (1) 40:1, (2) 100:1, (3) 1000:1
  • Drive efficiency: 96 to 98%
  • Displacement power factor: 0.98
  • Output frequency: 0.1 to 400 Hz (800 Hz Optional)
  • Serial communication interface
  • Jog forward and reverse
  • Power loss ride-thru: 2 sec
  • Inertia ride-thru
  • Selectable auto restart after momentary power loss
  • Programmable auto restart (0 to 10 attempts) on resettable fault 
  • Critical frequency rejection: 3 selectable, adjustable bands


Control Methods:
(1) Volts/Hertz; (2) Open Loop vector; (3) Flux vector (closed loop)

Protective Features

  • DC bus CHARGE indicator
  • Optically-Isolated controls
  • Phase-to-phase/phase-to-neutral short circuit protection
  • Ground fault protection
  • Electronic motor overload (UL)
  • Current and torque limit
  • Overtorque/undertorque detection
  • Fault circuit: overcurrent, overvoltage, and overtemperature
  • Input/Output phase loss


     
 Design Features
  • 32-bit microprocessor logic
  • Alpha-numeric operator, removable, multilingual, 2 lines x 16 character
  • 24 VDC control logic
  • Programmable outputs. One form A and two open collector
  • Timer function
  • RS-232 communication port
  • Multi-speed settings: 9 available
  • Remote speed reference: -10 to +10 VDC (20 kohms)
    or 4 to 20 mA (250 ohms)
  • Setpoint (PID) control
  • PID plus reference control
  • Signal follower: bias and gain
  • Analog monitor output: -10 to +10 VDC proportional to output parameters
  • Dual motor parameter sets
  • Auto-tune to motor characteristics
  • Easy access, parameter groups
  • Common bus capability
  • Programmable flash ROM, via R-232C
  • Run and fault contacts (1A)
  • Up/down/hold reference
  • NEMA 1 enclosed or protected chassis

Service Conditions

  • Ambient service temperature: -10 °C to 40 °C (104 °F) NEMA 1,
    to 45 °C (104 °F) NEMA 1, to 45 °C (113 °F) protected chassis
  • Humidity: non-condensing 95% 
  • Altitude: to 3300 feet
  • Service factor: 1.0
  • Input voltage: +10%/-15%, 575 to 600 VAC
  • Enclosure: NEMA 1 or protected chassis
  • Input frequency: 50/60 Hz ± 5%
  • 3-phase, 3-wire, phase insensitive
  • Vibration: 1G (to 20 Hz), 0.2G (20 to 50 Hz)
Additional Vector Control Features
  • Speed resolution
    0.01% with digital reference
    0.1% with analog reference
  • Speed regulation: (15 ° to 35 °C)
    (2) 0.1% with digital reference
    (3) 0.01% with digital reference
    (3) 0.1% analog reference
  • (3) Encoder response: 300 kHz
  • (3) Stall torque: to 150% at zero speed for 1 minute. 100% continuous.
 Additional Features for V/Hz
  • DC injection braking adjustable current level
  • Ramp stop or coast to stop
  • Frequency resolution:
    0.01 Hz w/ digital ref., 0.06 Hz w/analog ref.
  • Frequency regulation (15 ° to 35 °C)
    0.01% w/digital ref., 0.1% w/analog ref.
  • Torque boost: full range, auto
  • Current limited stall prevention during accel, decel and run
  • Synchronized start into rotating motor via speed search 
  • Volts/hertz ratio: 15 preset and one infinitely-adjustable pattern
  • Slip compensation

Standards & Reliability

  • UL and cUL listed
  • IEC: 146A
  • MTBF: Exceeds 28 years
  • Circuit burn-in: 96 hours at 85°C
  • Tested on fully-loaded motors
  • Surface mount devices
Number
Title   
Type 
 
Rev Date Size
IG.AFD.12 Installation Guide for Profibus DP Option CM061 Installation Guides 7/1/2004 1.1 MB
IG.AFD.13 Installation Guide for DeviceNet Option Card CM059 Installation Guides 7/1/2004 124 KB
IG.AFD.14 Installation Guide for DeviceNet Option Card CM05X Installation Guides 7/1/2004 109 KB
IG.AFD.17 Installation Guide for Modbus Plus Option Card CM071 Installation Guides 7/1/2004 1.8 MB
IG.AFD.25 Installation Guide for EthernetModbusTCP/IP Option CM090 Installation Guides 7/1/2004 121 KB
IG.AFD.51 Installation Guide for Analog Ouput Option Card AO-08 AO-12 Installation Guides 7/1/2004 63 KB
IG.AFD.52 Installation Guide for Isolated Analog Output Option Card AO-001 Installation Guides 11/3/2004 89 KB
IG.AFD.53 Installation Guide for Analog Input Option Card AI-14U Installation Guides 7/1/2004 44 KB
IG.AFD.54 Installation Guide for Analog Input Option Card AI-14B Installation Guides 7/1/2004 81 KB
IG.AFD.55 Installation Guide for Isolated Analog Input Option Card AI-040 Installation Guides 7/1/2004 80 KB
IG.AFD.56 Installation Guide for Digital Output Option Card DO-08 Installation Guides 7/1/2004 108 KB
IG.AFD.57 Installation Guide for Digital Output Option Card DO-02C Installation Guides 7/1/2004 113 KB
IG.AFD.58 Installation Guide for Digital Input Option Card DI-08 Installation Guides 7/1/2004 49 KB
IG.AFD.59 Installation Guide for Digital Input Option Card DI-16H2 Installation Guides 7/1/2004 68 KB
IG.AFD.60 Installation Guide for Encoder Feedback Option Card PG-X2 Installation Guides 7/1/2004 114 KB
IG.AFD.61 Installation Guide for Dual Encoder Feedback Option Card PG-W2 Installation Guides 7/1/2004 101 KB
JVOP-137_JVOP-138 Remote Operator JVOP-137; Remote Interface JVOP-138 User's manual For Varispeed 600 Series Technical Manuals 4/18/1999 121 KB
PP.P5G5.01.Troubleshoot GPD 506/P5 and GPD 515/G5 Unit Troubleshooting Manual - Section One Training Manuals 6/1/2003 720 KB
PP.P5G5.02.Troubleshoot GPD 506/P5 and GPD 515/G5 Unit Troubleshooting Manual - Section Two Training Manuals 6/1/2003 401 KB
PP.P5G5.03.Troubleshoot GPD 506/P5 and GPD 515/G5 Unit Troubleshooting Manual - Section Three Training Manuals 6/1/2003 499 KB
TM.AFD.12 Technical Manual for Profibus-DP Option CM052 Technical Manuals 1/31/2004 2.4 MB
TM.AFD.13 Technical Manual for DeviceNet Option CM059 Technical Manuals 5/1/2004 929 KB
TM.DW.03 DriveWizard 6.0 Software User Manual Technical Manuals 9/14/2004 1.6 MB
TM.G5SW.003 G5 High Frequency Software Technical Manual Technical Manuals 7/1/2004 10 KB
TM.G5SW.005 G5 Traverse Control Software Technical Manual Technical Manuals 7/1/2004 45 KB
TM.G5SW.007 G5 Power Loss Braking Software Technical Manual Technical Manuals 7/1/2004 20 KB
TM.G5SW.009 G5 High Slip Braking Software Technical Manual Technical Manuals 7/1/2004 35 KB
TM.G5SW.012 G5 PID for Trim Control Software Technical Manual Technical Manuals 7/1/2004 90 KB
TM.G5SW.015 G5 Eliminator Software Technical Manual Technical Manuals 7/1/2004 200 KB
TM.G5SW.017 G5 OV Suppression Software Technical Manual Technical Manuals 7/1/2004 36 KB
TM.G5SW.020 G5 Motion Control Software Technical Manual Technical Manuals 8/18/2004 94 KB
TM.G5SW.021 G5 Spindle Orientation Software Technical Manual Technical Manuals 7/1/2004 87 KB
TM.G5SW.022 G5 Output Voltage PID Software Technical Manual Technical Manuals 7/1/2004 27 KB
TM.G5SW.045 G5 Digital Velocity Follower Software Technical Manual Technical Manuals 7/1/2004 127 KB
TM.G5SW.046 G5 Electronic Lineshaft Alignment Software Technical Manual Technical Manuals 7/1/2004 118 KB
TM.G5SW.047 G5 Electronic Line Shaft Technical Manual Technical Manuals 7/1/2004 56 KB
TM4024.10 Technical Manual for GPD515/G5 with SysBus and SysBus/2 l Technical Manuals 7/12/2001 8.9 MB
TM4025 Technical Manual for GPD515/G5 with Modbus RTU Option Technical Manuals 8/1/2001 559 KB
TM4515 GPD515/G5 Drive Technical Manual Technical Manuals 4/1/2002 4.4 MB
TM4556 Technical Manual for GPD515/G5 with DeviceNet CM053 Option Technical Manuals 8/1/2001 1.2 MB
TM4557 Technical Manual for GPD515/G5 with Modbus Plus Option Technical Manuals 8/1/2001 1.2 MB

 

VS mini
1/8 - 1 Horsepower Single-phase 115 VAC AC Drive

Specifications and Features for VS mini
 

The VS mini drive provides maximum performance in a microsize design. This significant size reduction has been accomplished without sacrificing the essential programming features of our larger drives, allowing the VS mini drive to be used in a wide range of applications.

The VS mini drive is used for material handling, packaging, mixing, pumping, commercial wash machines, recreation equipment (tread mills), overhead doors and general industrial applications. This drive is the perfect choice for the design engineer, available in standard protected chassis and optional Din rail designs.

The microsize design features application-specific intelligent power module (ASIPM) devices and circuitry, a 16-bit microprocessor, and surface mounted devices for reliability and strength.

The VS mini is available in 1/8 through 1 HP models, 115 VAC single-phase, 50/60 Hz ranges.

 
Performance Features
  • Ratings: 1/8 to 1 HP at 115 VAC
  • Constant torque overload rating:
    150% for 1 min. (200% peak)
  • DC injection braking, ramp to stop
  • Electronic reversing
  • Adjustable accel/decel: 0.1 to 999 sec
  • Controlled speed range: 40:1
  • Drive efficiency: 95%
  • Displacement power factor: 0.98
  • Output frequency: 0.1 to 400 Hz
  • Frequency resolution:
    0.1 Hz with digital reference
    0.06 /60 Hz with analog reference


Performance Features

  • Frequency accuracy (-10° to 50°C):
    0.01% with digital command
    0.1% with analog command
  • Volts / hertz ratio:
    infinitely adjustable pattern
  • DC injection braking: adjustable amplitude, duration, and current limit
  • Torque boost: full range, auto
  • Power loss ride-thru: 1 sec. min
  • Speed search
  • Auto restart
  • 3 Critical frequency rejection settings
  • Slip Compensation


Standards

  • UL listed
  • cUL
  • IEEE STD 444 (ANSI-C343)
  • IEC: 146A


Protective Features

  • Current limited stall prevention during accel, decel and run
  • DC bus CHARGE indicator
  • Isolated operator controls
  • Phase-to-phase / phase-to-neutral short circuit protection
  • Ground fault protection
  • UL 508C programmable electronic motor overload
 Design Features
  • 16-bit microprocessor logic
  • Digital keypad operator
  • Programmable form C contact for customer use: 1A at 250 VAC or 30 VDC
  • 24 VDC control logic
  • Carrier frequency: 2.5-10 kHz
  • 8 Multi-speed settings
  • Remote speed reference:
    0-10 VDC (20K ohms) or
    4-20 mA (250 ohms)
  • Signal follower: bias and gain
  • Analog monitor output:
    0-10 VDC proportional to output frequency or current


Design Features

  • Over 70 programmable functions
  • Fully EMC compliant when optional RFI filter connected
  • MTBF: exceeds 28 years


Service Conditions

  • Ambient service temperature:
    -10°C to 50°C (14° to 122°F)
  • Ambient storage temperature:
    -20° to 60°C (-4° to 140°F)
  • Humidity: to 90% non-condensing
  • Altitude: to 3300 ft; higher by derating
  • Service factor: 1.0
  • Input voltage: single phase 115V, ±10%
  • Input frequency: 50/60 Hz, ± 5%


 

 
Number
Title   
Type 
 
Rev Date Size
2Y25-0441 Remote Digital Operator Kit, DS089 for VS mini and GPD205 Installation Guides 6/8/1999 141 KB
TOE-S606-10.10 Manual for VS mini C Series Spec A and E Technical Manuals 2/1/1995 1.6 MB
TOE-S606-10.20C VS mini DRIVE INSTRUCTION MANUAL Technical Manuals 7/1/1999 3.0 MB